fox_racin4

hows it a vs thread? lol hes asking how well itd work and people are giving opinions on it

They were refering to other guy. Ive never had an issue with type Rs and ive ran 2000rms to one 12 daily before..

So he can say "i built this MYSELF" I have a 15" here i built.. Its a pretty awsome feeling whwn you take a pile of parts add some glue an finish with a fully working sub.. (not a drop in recone) Its also pretty fun to build a sub..

My mechman 425 would make a whole 80a at idle.. Id sit at 12.6 at idle usually Since them ive added a singer 400a alt and a 250a alt And can get about 3/4 volume ( 4 saz4500s @.35ea ) without dropping under 13v And i only have 6 batts

Ill be there, not sure what numbers the truck will be doin as some new equipments on the way

no cannot to that strap them so its 2 pairs of amps, and get a pac-1

12's can hit deep notes big guy i have some 10s and i can destroy 27hz.... and play well into the mid 55hz area..

I also did that in the bed of my truck... Works well to say the least.. Lol My 2 chans would Thermal protect without the fan... They have yet to protect!

The 200.1 will do rated power... Theres ALOT of debates about the 200.1 right now with dbdrag..

how are you tunned to 38? Teach me plz. I wanna know how you tunned to 38!! Settle down jiggle stick, Fox is from Canadia, they spell shit different up there..... My phone froze.. To cold in igloos to use phones eh Tuned* lol If you search my build log te last couple pages have vids.. Or search Lauziere1 on youtube he has alot of vids of the truck.. I can do a 55.1 on music at 46hz And peak at 55.3@39hz And even down to 30hz its doing a 152 Its all on how the box/wall is built really

Im tunned to 38hz, can still destroyyy 27hz and pull off a 152@30hz Its alll about how the box is built...

http://s25.photobucket.com/albums/c55/fox_racin4/?action=view&current=20360f9f.mp4

new deck, same problem i think they all do it, kinda of hard to watch all 12 of them at the same time since i dont want to leave it playing when said problem happens.. uploading a new/better vid

yes, same problem swiched RCAs from master amp to other master amp, same thing only happens in the mid 40hz area, will try a new deck and then rewire for the 4th time lol

^this. Cross directional loading was my first guess. still does it with 6 not hooked up, which eliminates it as a loading issue

tried swapping RCAs same issue, my next step is a new deck..

keep an eye on the ipod cabke.. my dash has eaten 2 so far.. lol

i shall give that a try! i do need to rebuild baffle soon.. but it will still be either port accross top or some type of clamshell.. no side ports for me..

I do have a TL here, The thing that gets me,is the SA10s were fine, and they were getting quite a bit more power Where should i place the TL? I dont want to keep playing it when the "problem" is happening, as im sure its not very good for the subs lol

wiring has been more then tripple checked lol

thats what next.. apparently it helps alot and usually gains quite a bit, even tho its not built for numbers

both sides read 1.2ohm on DMM shitty camarah ftl theres no scratching

heres a shit wiring diagram basically, theres 6 subs per pair of 4500s, at 1.2 strapped theres 4 sets of .66 loads, which i seriesd to 2 1.2 ohm loads so each pair of amps has 6 subs at 1.2 strapped

exact same box, pulled SA10s out sat after show had XFLs in by sunday at 10pm heres a quick vid only really noticeable at 5 sec in and right at the end, the pinging noise IS NOT THE SUBS! lol

15cubes before sub displacement And 4 sax4500s at .6ea Subs are probly getting just over rated power