Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. you connect the + of each battery together (use a fuse right after the front batter and right before the back battery) and connect the - of each battery together.
  2. It does over a 150 and the subs play different frequencies. There is some over lap but the 18s do the low down dirty work and the 15s the higher stuff. It does it, I have heard it and seen it do it. However, it has nothing to do with wiring 15s and 8s on the same mono-block amp. That is dumb.
  3. any chance you could show us the other side of the amp? The power and speaker connection side?
  4. No, nothing in that car moved except subs. You all realize the airbag is not set off by anything inside the cabin of the car right? It takes a significant amount of force to trigger an airbag. Usually in the opposite direction of that which you are traveling. How many of you have been thrown into a dash or door or whatever when the subs were playing?
  5. 2 so far, I edited my post after I read what he wrote.
  6. your voltage isn't worth breathing in the poisonous gasses.
  7. skin effect is when the current flows near the outside of the wire. It's an A/C thing and happens worse at higher frequencies.
  8. There is no way to say. It is possible that your numbers go down too.
  9. #1 Not sure. #2 I know if it gets too hot you can burn up the voice coil which changes the ohm for sure. #3 answered above (edit: I didn't read the answer above) Dampening your vehicle changes it's acoustic properties, it doesn't necessarily stop flexing. I don't really understand it more than that so I will let someone else explain. #4 I wouldn't worry about skin effect on subwoofers. Maybe on tweeters but I don't think even then it comes into play.
  10. they are regular diesel batteries 1350 cranking amps 900 cold cranking amps each its just for now until i get more cash flow they are sealed batteries right? to tell you the truth idk i know it has a vent on the side that vent just vents poisonous gasses out of the battery... might wanna take em out till you get some sealed batteries.
  11. they are regular diesel batteries 1350 cranking amps 900 cold cranking amps each its just for now until i get more cash flow they are sealed batteries right?
  12. It could be possible to shake the sensor enough I suppose, but nothing in your dash can set off the air bag.
  13. ah sorry, you do need the tweeter input, not the woofer input. Still no need to use both inputs if they are going to be a single signal.
  14. You don't have to use the tweeter input, It is an option. If you are only going to run a jumper to the tweeter input it wouldn't make any difference.
  15. sounds like it is either a loading issue or simply a sub not working (either blown or not hooked up). Double check the sub you think is bad and make sure all the connections are good.
  16. looks nice, what kind of batteries are those?
  17. can someone explain why to use the different -db settings when setting gains? that has always confused me.
  18. I don't know much about Orion stuff, but are both the amps the exact same model? I only ask because you said one is new and the other is 5 years old.
  19. yeah my bad, I didn't see the bandpass option there!
  20. if you use a DMM, the voltage will drop above your LPF setting. If you play a 68hz tone and get your max voltage reading(ie. 34volts) then at 69hz it reads less (like 31volts), you know that is where your LPF is set at. EDIT: sorry I didn't really read what he wrote. What he is saying is to set your amp to the desired voltage output, play a test tone where you want your LPF to be set at. Turn your filter adjustment down until the voltage starts to go down and then you know where your LPF is set.
  21. i would be interested in hearing your thoughts on a level 4 12 and subtle...
×
×
  • Create New...