Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. are you sure it is coil you are smelling or just glue?
  2. how new are your subs? did you check to make sure that your H/U distorts are 37? Just because his did doesn't mean yours will. oh yeah plus
  3. I have to question this. I have a 3way set rated at 150 per side. Now, if you break that set down to individual speakers, each driver is rated at 150. So shouldn't the crossover be able to handle 450 watts?(3x150) I am not totally sure to be honest. With my RF set, the total power handling was the combined power handling of the tweet and mid.
  4. you can't distribute other peoples copyrighted material regardless of profit or not
  5. bridging and stereo start to get really confusing so stay away from that. As far as power handling, the crossover should be able to handle what ever the speaker can.
  6. The product manual should tell you the RMS per speaker, use that to determine RMS. One of the biggest benefits of bi-amp or active is the ability to adjust the tweeter level AND the mid woofer level. Yes active is more efficient but using passive crossovers doesn't absorb very much power. I think someone said about 20%. It is not insignificant but for a rather large amount of people it is nothing to worry about. The ohm load on changes crossover points if you change the ohm load after the crossover (ie, 2 speakers on a single crossover output) so if you want to use 2 speakers with passive crossovers on a single channel of an amp, run 2 wires from the amp to 2 crossovers then to the 2 speakers. In your case, each crossover will have 2 inputs since you are bi-amping so in total you will have 8 wires coming from your amps (or 4 wires that split BEFORE the crossovers). That will give you 2 ohms on each channel and will allow the crossover circuit to remain at 4 ohms. At least I am pretty sure that is how it works
  7. Yeah that dayton may not be a bad idea either. Lower power but still plenty of power for that sub.
  8. Mount your amp, get a better ground, stop in hooking your connections, set your gain correctly, stop using bass boost, and just use the same amp to run both JL 12s. Ps, if you keep replacing blown fuses that should be an indication something isn't right. I'm not sure what kind of spark you were looking for but I don't know of any spark that is good.
  9. If your alt is on it's way out anyway, get that first. All the batteries in the world won't do you any good without one. The batteries supply stored power whenever an alt can't keep up, which the alt then has to replace. If your alt is still going strong and they is no need to replace it soon, then adding a second battery may be the better option for now. Just make sure you keep the batteries charged up!
  10. alright, sounds like its a go then. it will be a while before i do it, but for $150 it seems like a good deal.
  11. I have a JL 12w0v2 sitting around my parents garage doing nothing. I have no subwoofer in my house, just 2 bose 201s I got for cheap. They sound good enough but lack in the low end. So I thought why not build a box for my JL and use it! But I know NOTHING about home audio outside of hooking up a receiver, DVD player, TV and game consoles, the basic stuff more or less. I have no desire to go the 12v route in my house, I have access to 110v so I'm gonna use it and from what I have read a plate amp is the way to do. I know nothing about plate amps so I found this Bash 300W plate amp that is a perfect match (watts and ohm wise) to the JL. I don't know if Bash is a good brand or if they are the Pyle and Rockwoods of home audio. Plus, do you put this amp right onto the sub box? It looks like that is the idea based on the picture.
  12. you would think someone would take good pictures if they wanted that much for them. And maybe pictures of all of them too. but damn, $300 for used? that is far from a hot deal.
  13. I don't know much about JL subs but 17 per seems a bit much. Maybe someone else will chime in and help ya!
  14. Just connect both batteries in parallel and run them that way. There is zero reason to use an isolator for this, and there is no need to try and run a 2500 watt system with the car off. Only bad things can happen if you do.
  15. 13 sq in of port total?
  16. lol at the serious comments funny vid tho!
  17. took it out of mine too. 1100 watts takes roughly the same power to make regardless of what amp you are using (of course amps efficiency changes this). I'm assuming OFC and a real 4g. If that isn't the case then well, that isn't the case then. So we agree to disagree, I say it is adequate, you say it isn't.
  18. That assumes perfect efficiency, but yes for the most part that is right. Of course, that is MAX draw, your average draw is well under that which is why 4g will work just fine. 4g will sustain 200amps for short periods and 150amps safely so there is no need for 0g with 1100 watts. If he already has 4g in the car, use it just fine. However if he is just trying to save money now, then I would suggest to go ahead and use 0g and save some money in the long run.
  19. Thanks, I'm sure Rockford was thinking they would reduce the output of the amp by making sure it wouldn't get enough power. Or they simply didn't know what they were doing.
×
×
  • Create New...