Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. test it at every frequency you play, I believe using a clamp.
  2. 1 amp is always easier to tune. unless they are linkable/strap-able then that takes care of that.
  3. not that I know of. And moving your port in and out of the box doesn't affect port area
  4. Do you mean if part (or all) of the port is sticking out of the box does it effect the air flow? Then no, it doesn't, the only thing it changes is how much volume your port takes up, which in turn changes your net volume of your enclosure which would then effect your tuning.
  5. IIRC the clipping light on a bass knob only shows clipping based on the output section of the amp. Sending the amp a clipped signal won't show up on the bass knob, at least this is how I remember someone explaining it.
  6. No, constant power refers to constant power as the impedance changes. What you are thinking of is a regulated power supply, 2 totally different things.
  7. then you are old enough to die for your country and kill another man. and besides, can't you own a gun at 18 anyway? isn't this just about alcohol?
  8. Are you asking a technical question about impedance or just making sure you have your system wired up for maximum output from your amps?
  9. Actually, when I first heard about it on the radio the buildings had not collapsed yet. It wasn't until I was in the lobby of the music building and someone came out of the office and said one of the buildings collapsed. Then all of us crammed into the office and just watched what unfolded.
  10. IF the Ravens play like that all year, no one will touch them. I really don't see them getting 7 turnovers every game though. I still think it's the Pat's year I hate the Pats too.
  11. I was on my way to school. I lived basically across the street from campus, took about 5 minutes to drive to school. About half the time I would walk to school so it just happened that I drove that day. My first class didn't start till probably 9 but parking was a bitch if you didn't get there early so I got there early. I listened to Bob and Tom every morning I drove and when I got into my car they were talking about a small plane that had hit a building. They weren't joking about anything but they didn't know what had happened. For the 5 minutes I was in my truck that is about all I got out of that. I parked and walked into the music building without really knowing what had happened and as soon as I walked in you could tell something was up by everyones actions. I quickly got filled in and spent the rest of the day going to classes, which were all about what happened and had nothing to do with what the class was about.
  12. Can you give us your deffinition of SQ?
  13. Looks nice! Let me know how it works I migh do something similar.
  14. Same. Speakers run on A/C so the skin effect can come into play but that is usually not a concern in car audio.
  15. More strands equals more flexibility, that is all. When dealing with DC the number of strands doesn't really matter.
  16. that is tricky there. you aren't really asking the right question. You don't adjust your gain to match impedance. You adjust your gain to match the INPUT voltage. the lower your INPUT voltage, the higher you set your gain and of course visa versa. The ohm load your amp sees changes the output of the amp. For example, 8 ohms is 100 watts and 4 ohms is 200, 2 ohms is 400 and 1 ohm is 800. With a DMM you set the output voltage so that it equals the wattage you want. (V/I²=W). Doing it this way has nothing to do with clipping. Setting your amp this way just sets the gain to what the output of the amp is supposed to be. You have a 1500 watt amp at 1ohm? Set the (gain) output voltage to 38.7 volts. If you hook up an 8 ohm speaker to that amp, the output of the amp goes down but the output voltage stays the same. If you wanted less output from your amp, you would set the gain accordingly. (for example, you have an amp that is way too powerful for your speakers). The DD-1 doesn't set output voltage. The assumption using the DD-1 is you want the maximum unclipped/undistorted signal coming out of your amp. It shows that point with the light. Even if you don't want maximum output from your amp, you can still set the gain to that and go down from there. Either way you would know you have a clean signal coming out of your amp.
  17. The DD-1 has nothing to do with setting A specific output voltage. The DD-1 finds the maximum unclipped/distorted output of your amp. The output voltage and impedance do not effect the amps output as far as clipping goes (assuming your electrical can keep up with the amps demands). If you are worried about the output of your amp being too high, set it with the DD-1 to find your maximum unclipped output, the use a DMM to adjust your gain DOWN to whatever voltage you need.
  18. Set I with the DD-1 then turn your gain down from there.
  19. they held up kinda to 2 level 4 15s i had, but not close for the lv5 I'm confused, you already know they won't hold up but asked about them anyway? Or have I just totally missed something here.
  20. that's what I have in my car, running off a T400-4. Keeps up with my 2 level 4 12s really well.
  21. Yep, and that can be with anything. You may want to drag race, or spend money on fancy hats because they make you feel happy, or gambling. It just so happens that fewer people understand car audio so more people will disagree with spending money on it. absolutely, it is SO disheartening when someone says, you spent money on that. I marched a summer of drum corps and to the people who understand drum corps I could talk to them, tell stories, show videos and play CDs. To the people who have no idea (the don't knows, right?) they would say, you had to PAY to do that? It just deflates you. Same with car audio, they say, you had to pay for that? My wife hates bass, but at least she doesn't dog me for it. She looks at it and says it looks nice, just don't let me hear it! That, I can live with
  22. never try to convince someone who has no interest in what you do that the amount you spend on it is worth it. To them, a penny is too much spent!
×
×
  • Create New...