Jump to content

Bump4life

S.O.T.M. Winner
  • Posts

    4665
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Bump4life

  1. i applauud your cooperation and willingness to learn. although i am fairly new here myself so i do not mean to sound like im a know it all either. but if you don't know for sure just sit back and wait for a post from an experienced member so you can learn. but glad you aren't like the rest of the idiots and other noobs we get on here. cheers mate!! bass for all!
  2. although it seems like an easy question to answer, loud highs will kill your ear way more then lower frequency bass notes. over time both will hurt your hearing but i think it was discussed that highs around 2000hz will have a worse effect on your hearing. unless bass is like 160+ db there are a couple posts on here where it is discussed. use the search feature.
  3. i think it is a massive troll attack from a band of members from another forum!!!??
  4. i smell a noob in the air trying to give advice maybe, preference, its ok, what ever you want, just an example, kind of advice.
  5. check this out and see if someone lives close to you that has one. http://batchgeo.com/...6f1640587e3e4cf edit: dammit lbox!! ninjaaaa!!!!
  6. one more thing. don't use bass boost ever. it will scree up your flat frequency response and most likely cause you to clip. just dont do it. no bass boost ever. turn that down to 0 turn it off. edit: ninjad
  7. if you have a good speaker and enclosure design you can pretty much play any daily music. i tune to 37hz. i listen to all music. it plays rap with authoity and rock and classical and everyting in between. generally if all yo ulisten to is rap you want to tune lower. if you never listen to rap or any low bass heavy music tuning higher is ok.(40hz and above)
  8. Thanks that's what i was looking for all along, so in all essence when i have a box built i have to select the frequency i want to play it at mainly and i tweak it with that frequency being the base right??? When you create your box, you will choose a freq.. some like 31, 32, 33, 34, 35, 36, 37, 38, 39, and most.. don't like 40. It's all preference. I am trying to learn the whole low pass ect but your SSF Subsonic filter is basicly to stop the freq from being sent.. so let's say your box is tuned to 33 hertz, you have your subsonic at 28, the amplifier won't send a signal under 28 hertz to protect your subwoofer. i saw this just before i got off. the filters are called filters for a reason. they dont just cut off all notes at the frequency you set to. they cut of db per octive. so it is a gradual slope cutoff. LPF is the cutoff on the high end. subsonic filter is cutoff on the lowend. they filter out frequencys above or below them. thats why it will be different in every system cause the amp filters will be different maybe, or loading in vechicle wil be different. thats why you must play with it and find settings you like best while keepign woofer safe. so LPF cuts off bass notes above frequency you set to. and subsonic filter cuts of frequencies below what is set to. but it does not cut off all frequencies to 0 it just makes the notes have less amplitude. the further they get away from the setting you have.
  9. Thanks that's what i was looking for all along, so in all essence when i have a box built i have to select the frequency i want to play it at mainly and i tweak it with that frequency being the base right??? i dont quite understand your epiphany ahha. yes when building a ported box you must select a frequency to tune it at based on vechicle and on subs being used. then set subsonic filter and LPF to get desired frequency response while protecting speakers
  10. im going to bed. if you want any questions answered you can pm me. ill answer it later today. peace
  11. ok. you cant really "tune" a ported box with your amp. i mean you sorta can. ok so your box is tuned at a specific frequency. most likely it is a 45 hz + tuning. most prefab boxes are high tuned. most of the time you want to set your subsonic filter about 5 hz below tuning frequency to protect woofers. in your case, i would think that your port area on that box is too small and you may get enough pressure to save your woofers. try this. set your subsonic at about 30 hz. and your LPF at about 80 hz and play a wider variety of music and make sure speker doesnt bottom out. ( you hear a click noise) or you here the woofer unloading where no tone is produced and speaker is flailing and moving air. then set your gain accordingly trying not to clip. you can adjust your subsonic and LPF to see what they do. the lower you set your subsonic filter, the more lowend you will bring out, but if you bring too much out you can wreck your woofers from unloading. find the sweetspot where you get most bass and lowend and speakers still protected.
  12. how exactly do you set your amp to 20 hz if your amp only goes to 50 or 60 hz??? do you set it to the lowest it will go then tune the subsonic filter??? or does it even matter where the frequency is if your tuning the subsonic filter??? which is better dd-1 or cc-1??? number 1, dd-1 and cc-1 are 2 different devices used for 2 different purposes. dd-1 is to tune you amp so yuo set gain correctly without clipping. cc-1 is to check crossover points calibration and gain matching. and in response to your first question i have no idea what you are talking about. i am assuming you are trying to tune your sealed box with amp?
  13. Lmao, not on this thread your not.. tune in on the build log! xD thats what i mean. i was just lettign you know here. ahha
  14. no shit your liable. well ask away, we gotta make sure you know your shit for the good of the bass community if you are installing anyway.
  15. tuned inn!
  16. ^ this guy. Lol Everyone learns. i wouldnt be a dick if he was some noob that was just getting into the game. we were all there at some point. but like this guy works at a shop and is making money installing systems for people. he should know these basic questions if he is professionally installing stuff in paying customers cars. like he obviously doesnt know what clipping is and thinks tuning the box is turning a dial on the amp. i want to know where this guy works so we can save the company money from having all the customers coming back in with warranty claims. and for people who dont buy warranty to not get an install from this guy. the questions this guy is asking as installer is scaring me.
  17. i can't believe this guy works at a shop
  18. nice man!! maybe a video or 2?
  19. time to retire for the night from SMD another day fiilled with learning!

  20. first one definetly looks like deka. if it performs same we hit jack pot
  21. Not for slot ports and alright I am building a box for a sp4 18 and it'll be like 9 cuft and I need a slot port tuned at 35hz the box will be 24in long by 24in wide and 36in tall do about 10 cuft but with all the displacements from baracing and the sub about 9 so I need to figure out the height, wideth and depth of the port! And it's in a 2002 dodge Dakota! yes, it is easy for slot ports. not hating on you john253a, but OP, anyone with a brain and common sense or a little browsing on this forum could have designed you that box. i agree with snowdrifter, it is too easy of a program. everyone that knows how to use it thinks they are a box making guru, thats how easy it is. if it were me id give that 18 a little less space. almost 8 cubes is even a lot for an 18. try around 6 cubes. everything else is prettty nice though. port area per foot is a little light id go closer to 15-17. good luck!!
  22. tuning around 37 hz will be good for a lot of types of music. I tune to 37 and it sounds great on all music. but tuning really only helps to get down low so your subs don't unload. if you have subs with a huge displacement (most good subs). If you have shitty subs you are gunna want to tune lower to protect them from unloading. what kinda subs will you run?
  23. yes i am aware that the rise is different among the different frequencies just not too sure so thanks for imput. i guess i can't give you exact numbers. for my instal it works and it was a huge difference going from 1 ohm nominal to .5 ohm nominal with no observed bad effects on amp or sound quality. amp still runs cool. i guess my post is just touching the surface. how would impedence drop below sepeakers nominal load? if lets say speakers are wired at 1 ohm. how would the amp ever see less than this? never heard of that? anyone else know a thing or 2 about impedence drop?
  24. maybe a lil more port area? low 30s. i never had a JL sub. so idk what they like.
×
×
  • Create New...