zachfowler222 Posted February 5, 2011 Report Posted February 5, 2011 whats the best way to secure down a wall in a back seat? Quote I SCAM PEOPLE OUT OF MONEY... AVOID ME LIKE I AM AN AIDS INFECTED RETARD...
OBI Posted February 5, 2011 Report Posted February 5, 2011 whats the best way to secure down a wall in a back seat? From what I've heard its all car Dependant. Look for solid areas like where the seats/seat belts mounted, look for sturdy areas to bolt it to. Quote
BulletInjection Posted February 5, 2011 Report Posted February 5, 2011 probably a couple 1/2" bolts. I really want to do a wall soon Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
kingsuv Posted February 5, 2011 Report Posted February 5, 2011 Wood screws through the roof thenvbent over for safety Quote Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out. not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it.
Bigg Boy Posted February 5, 2011 Report Posted February 5, 2011 Bolt through the floor with big fender washers Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon)
zachfowler222 Posted February 5, 2011 Author Report Posted February 5, 2011 Wood screws through the roof thenvbent over for safety lmao have u seen that picture its on here somewhere(i think) someone tried to install a flipdown tv and screwed it in and they went thru the roof lmao Quote I SCAM PEOPLE OUT OF MONEY... AVOID ME LIKE I AM AN AIDS INFECTED RETARD...
Socky Posted February 5, 2011 Report Posted February 5, 2011 Best way, way boiler did it, roll cage then make it inside of it Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
baaudio Posted February 5, 2011 Report Posted February 5, 2011 i would find a way to utilize the factory seat belt mounts for the rear and then bolts with big washers for the front side. Quote Team NWSPL baaudio Build Log 2001 GMC Sierra walkthrough 4 Mechman Elite 370s, 10 AGM batteries, 3 Crossfire XS v2 18s, Crossfire 8k
jdub92 Posted February 5, 2011 Report Posted February 5, 2011 then you could tack weld the nuts to the bolts =P Quote
osamio Posted February 5, 2011 Report Posted February 5, 2011 I've seen the seatbelt bolts, AND the bolts used to mount the rear bench down. Both are in every car and straight to the frame. Quote 2009 Cobalt LT Pioneer Headunit 2x Pioneer 6 1/2 (stock amp) 2x Pioneer 1" tweeters (stock amp) 2x Pioneer 6x9 (stock amp 4x Pioneer 6 1/2 Pioneer GM-6400F Soundstream DTR 1700 R.I.P 2x Champion series PRO 12" subs 0 AWG Big 3, Stinger SP1700 battery To come: New or repaired DTR!!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.