joemon Posted May 11, 2011 Report Posted May 11, 2011 Hey I have 2 Kenwood excelon x1200m amps and I'm wanting to get 2 lvl 3 or 4 subs and put 1 sub on each amp. The lvl 3 comes in a dual 4ohm which gets 2ohm load from amp rated at 1200watts rms. This is where I wanna be at as of final ohm load. But lvl 3 max at 1200watts So I'm looking at the lvl 4 subs But I only see dual 2 and 1 ohm That means my amp won't be at a final ohm load of 2ohms which is where I wanna be at. So question is there a way to get a lvl4 sub with dual 4ohms so I can reach my goal for now? Or aNy other way to get Wat I'm looking for? Different brand subs like dc audio? Quote stevemeadedesigns.com/board/topic/105505-silvia-first-time-build-kenwood/
MrSkippyJ Posted May 11, 2011 Report Posted May 11, 2011 Dual 1 ohms will get you a final 2 ohm rating. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
dc=realbass Posted May 11, 2011 Report Posted May 11, 2011 Hey I have 2 Kenwood excelon x1200m amps and I'm wanting to get 2 lvl 3 or 4 subs and put 1 sub on each amp. The lvl 3 comes in a dual 4ohm which gets 2ohm load from amp rated at 1200watts rms. This is where I wanna be at as of final ohm load. But lvl 3 max at 1200watts So I'm looking at the lvl 4 subs But I only see dual 2 and 1 ohm That means my amp won't be at a final ohm load of 2ohms which is where I wanna be at. So question is there a way to get a lvl4 sub with dual 4ohms so I can reach my goal for now? Or aNy other way to get Wat I'm looking for? Different brand subs like dc audio? wire a dual 1 in series to 2ohm.. if u dont kno how go to youtube cause it would make more since to watch and learn.. a D1 can be wired to .5 and 2ohm.. but consider impedance rise. so u wont be gettin the full 1200rms from each amp.. Quote
siccostyle Posted May 11, 2011 Report Posted May 11, 2011 Doubt that either of those amp will put out 1200 maybe both of them might see. Either one of those subs would work for you. I would go with the lvl4's cause that will give you a chance to upgrade amps later. Quote 01 2dr ExploderBuild log2 18" DC Level 6's (M3's)DC 10k5 XS d3100's, DC 390 alt100' shok ofc cable Team ShokTEAM SUB SONIC ADDICTION
joemon Posted May 11, 2011 Author Report Posted May 11, 2011 Ok kool I must have missed that dual 1ohm wiring =2ohms but that makes this a lot easier for me Cuz I blew 1 of my other subs and wanting sumthing that WILL last My last subs rated 1000rms and 2000max So much for that! But my other 1 is still running strong... for now Quote stevemeadedesigns.com/board/topic/105505-silvia-first-time-build-kenwood/
joemon Posted May 11, 2011 Author Report Posted May 11, 2011 And thanx for the inputs guys!!! AnD where's the best cheapest place to buy a pair of DCs I'm new to this brand Quote stevemeadedesigns.com/board/topic/105505-silvia-first-time-build-kenwood/
jmilch Posted May 11, 2011 Report Posted May 11, 2011 And thanx for the inputs guys!!! AnD where's the best cheapest place to buy a pair of DCs I'm new to this brand There are more than a few reps who frequent this forum. Just make a post in this sub forum. Quote Pioneer AVH-P4300DVD | Hertz 6.5 | Alpine Type R 6x9 | Custom 200A Alt | Knu Flek 1/0 Big 3 and all wiring | Eclipse EA3422 | AudioQue 2200d | DC XL 12 | Red Oak Box ~2.8 cubes @ 30 hz |
That1Kid Posted May 11, 2011 Report Posted May 11, 2011 Pm corona_jeff He is a DC rep. Quote -98' Ford Expedition (Rest in Peace) -AVH-P3300BT -Crescendo BC5500 -4 18" DC m2 Level 3.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.