fecupe2001 Posted July 19, 2011 Report Share Posted July 19, 2011 That box suck ass IMO, why expending a lot of money on another AQ2200 instead of just building a proper box?? i would to AT LEAST 3 - 3.5 cubic feet and 56-63SQ of port... I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
Robert8252 Posted July 19, 2011 Report Share Posted July 19, 2011 You could try tuning a little higher. Cut the port down a little. Do the math and see how much. Maybe try 38-39hz tuning. Would also make net volume slightly bigger. If no big change try facing them in the trunk. See if it works any better 2013 F150 Crew Cab Old Build Log Feedback 2013 F150 Equipment - Some Awesome Stereo Sound Making Stuff Link to comment Share on other sites More sharing options...
DRauck Posted July 19, 2011 Report Share Posted July 19, 2011 3.5 by 10.25 That's a lot of port. You might be able to. shrink that down just a little to like 3x10.25 and increase your box volume a bit although I don't know if that would be enough to make an audible difference Yea what do you think would happen if I moved it out of the trunk. Like if you set your box in the backseat? It depends. You could try building a box and firing the sub/port forward, and sub/port up and see which one is louder. I think you'd see the best results adding more power to the box you've got though. If not, you might as well wall it and have a lot more fun than you are now Edit: fecupe2001 knows his shit. listen to him. 2011 Honda CR-Z Mugen 12" Kicker SoloX Subwoofer Rockford Fosgate t20001bd Pioneer AVIC-X930BT Head Unit Build Log Link to comment Share on other sites More sharing options...
SilveradoGoesBang Posted July 19, 2011 Author Report Share Posted July 19, 2011 That box suck ass IMO, why expending a lot of money on another AQ2200 instead of just building a proper box?? i would to AT LEAST 3 - 3.5 cubic feet and 56-63SQ of port... Yea I'll have to move it out of the trunk then what do u think about that? "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place Link to comment Share on other sites More sharing options...
C-Fizzy Posted July 19, 2011 Report Share Posted July 19, 2011 That box suck ass IMO, why expending a lot of money on another AQ2200 instead of just building a proper box?? i would to AT LEAST 3 - 3.5 cubic feet and 56-63SQ of port... Sounds like his box IS 3cf. 2 cubes for the subs with a 1cf external port. 2 cubes for two tens is good. No? under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy? Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 19, 2011 Report Share Posted July 19, 2011 That box suck ass IMO, why expending a lot of money on another AQ2200 instead of just building a proper box?? i would to AT LEAST 3 - 3.5 cubic feet and 56-63SQ of port... Sounds like his box IS 3cf. 2 cubes for the subs with a 1cf external port. 2 cubes for two tens is good. No? If that´s the case then my bad, i understood he had a 2 cubic feet box for the subs, sorry about that OP! I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
SilveradoGoesBang Posted July 19, 2011 Author Report Share Posted July 19, 2011 If I am to wall this car off can the wall sit on top of the seats and just go to the roof? "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place Link to comment Share on other sites More sharing options...
Supercharged DCs Posted July 19, 2011 Report Share Posted July 19, 2011 That box suck ass IMO, why expending a lot of money on another AQ2200 instead of just building a proper box?? i would to AT LEAST 3 - 3.5 cubic feet and 56-63SQ of port... Beat me to it... I'd spend the little bit of cash to build a more efficient box as opposed to buying another amplifier and electrical upgrades... Something's definitely wrong with the current box if your hitting those numbers with the equipment you have. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
DRauck Posted July 19, 2011 Report Share Posted July 19, 2011 If I am to wall this car off can the wall sit on top of the seats and just go to the roof? If you want it to it can sit on the backseat, but you'll be limiting yourself on space doing it that way Edit: And it probably won't look very good 2011 Honda CR-Z Mugen 12" Kicker SoloX Subwoofer Rockford Fosgate t20001bd Pioneer AVIC-X930BT Head Unit Build Log Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 19, 2011 Report Share Posted July 19, 2011 There definitly something VERY wrong, you should be able to hit a 137 with a single sub and that AQ wired at 2 ohm without much problems! I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.