Distorion Free, No Smoke Puffin, 15,000 watt Soundstream Ford Focus gets gains set with SMD- DD1

[meade916]

Distorion Free, No Smoke Puffin, 15,000 watt Soundstream Ford Focus gets gains set with SMD- DD1

how can i buy one of these?

[JustinWillmon]

Distorion Free, No Smoke Puffin, 15,000 watt Soundstream Ford Focus gets gains set with SMD- DD1

how can i buy one of these?

hahahaha apparently someone hasnt been looking around the site for the past month or so.

[00hoe88]

just curious may be a dumb question but was his bass knob the bass boost or the gain one ?

[MrSkippyJ]

is the bass knob a boost or level control?

ninja'd

Edited July 19, 2011 by MrSkippyJ

[AI James]

Distorion Free, No Smoke Puffin, 15,000 watt Soundstream Ford Focus gets gains set with SMD- DD1

how can i buy one of these?

hahahaha apparently someone hasnt been looking around the site for the past month or so.

or watched the video that pretty much is an advertisment

[tonedeaf]

Distorion Free, No Smoke Puffin, 15,000 watt Soundstream Ford Focus gets gains set with SMD- DD1

how can i buy one of these?

hahahaha apparently someone hasnt been looking around the site for the past month or so.

or watched the video that pretty much is an advertisment

Thats what I was thinking.

[tonedeaf]

Now, I was told that the DD1 can NOT set amps that are over 12K?? Is this true? How many watt amp will the DD1 safely set?

Taken from the manual:

Guaranteed operating range of input signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging

[Ray]

Well. 175v is really the limit.

If you have a 16000 watt amp i think you reaaalllllly dont give a shit about real clean sound.

Just use your ddm/scope.

[AMI CUSTOMS]

Now, I was told that the DD1 can NOT set amps that are over 12K?? Is this true? How many watt amp will the DD1 safely set?

Taken from the manual:

Guaranteed operating range of input signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging

I did some math for ya, just a guess, if wired and 1 ohm with expectation of rise to 1.66 ohm, that would be 125/1.66 = 75 amps AC, 125* 75 = 9375 Watts, so my assumption would be it can't do over a 10k amp. But would depend on imp rise, I would think current would be more of an issue, depending on the internal resistance this puts on the amp. I know my oscope puts .5-.6 ohm load on the amp just as is.

[tonedeaf]

Well. 175v is really the limit.

If you have a 16000 watt amp i think you reaaalllllly dont give a shit about real clean sound.

Just use your ddm/scope.

The guy in the vid did. Took the time to pull out the ol' earometer.