adam6604 Posted July 20, 2011 Author Report Share Posted July 20, 2011 yeah thats true, ill just keep it on 2 ohms Driving my 2008 Dodge Ram 2500 MEGA cab with the 5.7 hemi. Audio: Two 10" Alpine Type R's ( 1000rms models ) Hifonics BRZ 2400.1D @ .5 ohm Two Kinetic 1400 batteries ( soon to have XS power under hood ) Tsunami 1/0 Awg wire throughout truck. Stock Infinity 7 speaker system ( Junk ) soon to be replaced, probably all Alpine. Exterior: 17"Dick cepek rims with 33" Toyo MT tires Bushwacker fender flares Magnaflow true duel exhaust LED tail lights with Projector headlights Plasti-dip fun coming soon! Link to comment Share on other sites More sharing options...
jmilch Posted July 20, 2011 Report Share Posted July 20, 2011 You will likely smoke that amp without some better electrical. If you don't have a decent alternator, the number of batteries will not he helping anything. Pioneer AVH-P4300DVD | Hertz 6.5 | Alpine Type R 6x9 | Custom 200A Alt | Knu Flek 1/0 Big 3 and all wiring | Eclipse EA3422 | AudioQue 2200d | DC XL 12 | Red Oak Box ~2.8 cubes @ 30 hz | Link to comment Share on other sites More sharing options...
bdog Posted July 20, 2011 Report Share Posted July 20, 2011 Why dont u just order a d1 or d4 recone kit for your subs it will be cheap i think fi makes re recone kits if i remember correctly plus reconing subs are fun and easy REP Link to comment Share on other sites More sharing options...
1sickpuppy Posted July 20, 2011 Report Share Posted July 20, 2011 Why not just run your amp at 1 ohm? Your amp can handel that with ease and your up grades your planning will be effective for a one ohm load. What's your voice coil configuration wired at currently? And what is the impedance of your coils? My Current Project: 2006 Ford Focus ST HU: Kenwood KDC-X986 Amps: Rockford Fosgate R300-4 Hifonics Brutus BXi 1601D Sub(s): (2) Skar VVX8 want to add 2x Mids/Highs: VXI65 components (front doors), RE Pro 5x7FR (rear doors) Wiring: Big 3 done in Candace 1/0 awg. 1 run from battery to distro-block 1/0 awg. Cadance wire 4 awg Stinger wire from distro-block to amps. Electrical: stock alt. Optima Red Top. Link to comment Share on other sites More sharing options...
Supercharged DCs Posted July 20, 2011 Report Share Posted July 20, 2011 Why not just run your amp at 1 ohm? Your amp can handel that with ease and your up grades your planning will be effective for a one ohm load. What's your voice coil configuration wired at currently? And what is the impedance of your coils? He has two D2 woofers, he cannot run it at 1ohm with them. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
1sickpuppy Posted July 20, 2011 Report Share Posted July 20, 2011 Why not just run your amp at 1 ohm? Your amp can handel that with ease and your up grades your planning will be effective for a one ohm load. What's your voice coil configuration wired at currently? And what is the impedance of your coils? He has two D2 woofers, he cannot run it at 1ohm with them. Hahaha! That's my bad for not reading that he was running duel 2 ohms. Well then disregard what I posted. My Current Project: 2006 Ford Focus ST HU: Kenwood KDC-X986 Amps: Rockford Fosgate R300-4 Hifonics Brutus BXi 1601D Sub(s): (2) Skar VVX8 want to add 2x Mids/Highs: VXI65 components (front doors), RE Pro 5x7FR (rear doors) Wiring: Big 3 done in Candace 1/0 awg. 1 run from battery to distro-block 1/0 awg. Cadance wire 4 awg Stinger wire from distro-block to amps. Electrical: stock alt. Optima Red Top. Link to comment Share on other sites More sharing options...
soccer123x Posted July 21, 2011 Report Share Posted July 21, 2011 i always thought that hifonics would fry if u ran them under 1 ohm. i always ran mine at 1 and it got hot sometimes so i dont recommend running it any lower Link to comment Share on other sites More sharing options...
Mr. Darkjustice Posted July 21, 2011 Report Share Posted July 21, 2011 i vote no on stock electrical. just my .02 Fusion With A Stetsom 4k2d on 2 DC XL 15s tuned to 31hz and Subs and ports forward The Revolution Was Not Televised But There Is This Thread(clicky) Dr Merkenstein is my 360 gamertag and my profession. When shit gets real, call in the Doc Link to comment Share on other sites More sharing options...
soccer123x Posted July 21, 2011 Report Share Posted July 21, 2011 honestly id run it at 2 ohms it sounds way better if u ask me Link to comment Share on other sites More sharing options...
Dan2427 Posted July 21, 2011 Report Share Posted July 21, 2011 I had the same amp on a level 5 at half ohm. It was like that for 5 6 months no problem til the car was wrecked 2003 GMC Yukon Denali Alpine CDA 117 Redoing Mids/Highs 4 Runs of 1/0 Knukonceptz 2+, 2- 4 Deka 9A31's in back (Stock underhood) 250 amp Alt. AQ20K 2 18" Crossfire XS V.2's 12 cubes 33hz 149sq inches of port! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.