deepsilencer Posted August 26, 2011 Report Posted August 26, 2011 damn thats a insane build lol TEAM FLEX ISSUES,TEAM DC AUDIO 2000 Silverado Ext 1500 v.3 (Walled Silverado) 4 DC Power 270a Alts on A DC Power Quad Alt Bracket XS Power VCM,Stinger Volt Meters 4 AA Mayhem 18s 2 DC Audio 9.0ks Strapped 1 DC Audio 175.4 4 Selenium 6.5s & 4 Selenium 8s 4 Selenium Super Tweeter st350s 72 SQ Ft Of Stinger Roadkill Expert Alpine CDA 9887 XS Power d3400(Hood),6 XS Power d3100s(Bed) & much more..... 2011 Meca CA State Champion & State Record Holder In M5 Meca SPL:158.2 Meca P&P:137.4 DB Drag:159.1 USACI:161.2 BUILD LOG.....YOUTUBE CHANNEL.....FEEDBACK
MrSkippyJ Posted August 26, 2011 Report Posted August 26, 2011 so completely not my style, but I can appreciate the work and the quality of the work put into this thing! A question though, is there a concern for imagining at all in a set up like this or is it just cover all frequencies as loud as possible? (obviously I'm not implying a disregard for distortion quality of sound) i think it covers alot of frequencies cuz i have played multiple songs and all kind of diff music and all sound good..i didnt tune it, my boy from NY did (Ralphy soundz) oh yeah, im sure it does, and does it well! I just didn't know if there was consideration for imagining inside the vehicle or not. It's kinda obvious outside the vehicle there isn't any but I don't know how you would do it outside, it would totally be dependent on where the listener is standing. Since there are tons of listeners and they stand all over the place, impossible to do it outside. But with the doors closed, does it have any kind of front stage imaging or is it just loud? I'm not blasting the install or anything, mad props for the work and everything, I'm just not familiar with this type of install and competition format F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
doug118 Posted August 26, 2011 Report Posted August 26, 2011 yes sir...and there will be plenty of trucks there louder than mine..maybe even some cars lol Well on that note, I'll make the 5 hour trip eventhough it will probably take 8 with traffic that day. Please post up the info so I can plan this out 2001 Tahoe. Huge front stage and 55+ substage http://www.stevemeadedesigns.com/board/topic/196418-another-tahoe-build-huge-front-stage-and-155-substage/
tonedeaf Posted August 27, 2011 Report Posted August 27, 2011 so completely not my style, but I can appreciate the work and the quality of the work put into this thing! A question though, is there a concern for imagining at all in a set up like this or is it just cover all frequencies as loud as possible? (obviously I'm not implying a disregard for distortion quality of sound) i think it covers alot of frequencies cuz i have played multiple songs and all kind of diff music and all sound good..i didnt tune it, my boy from NY did (Ralphy soundz) oh yeah, im sure it does, and does it well! I just didn't know if there was consideration for imagining inside the vehicle or not. It's kinda obvious outside the vehicle there isn't any but I don't know how you would do it outside, it would totally be dependent on where the listener is standing. Since there are tons of listeners and they stand all over the place, impossible to do it outside. But with the doors closed, does it have any kind of front stage imaging or is it just loud? I'm not blasting the install or anything, mad props for the work and everything, I'm just not familiar with this type of install and competition format Once you have THAT many speakers that are that bug getting that much power, imaging goes out the window. Especially with them all everywhere. It's just loud and clean. I wouldn't think all the tuning in the world would give you any kind of imaging. But when they are that loud everywhere in the car, why would imaging be a worry?
MrSkippyJ Posted August 27, 2011 Report Posted August 27, 2011 oh yeah, im sure it does, and does it well! I just didn't know if there was consideration for imagining inside the vehicle or not. It's kinda obvious outside the vehicle there isn't any but I don't know how you would do it outside, it would totally be dependent on where the listener is standing. Since there are tons of listeners and they stand all over the place, impossible to do it outside. But with the doors closed, does it have any kind of front stage imaging or is it just loud? I'm not blasting the install or anything, mad props for the work and everything, I'm just not familiar with this type of install and competition format Once you have THAT many speakers that are that bug getting that much power, imaging goes out the window. Especially with them all everywhere. It's just loud and clean. I wouldn't think all the tuning in the world would give you any kind of imaging. But when they are that loud everywhere in the car, why would imaging be a worry? That is what I was thinking, I just wasn't sure and didn't want to assume anything. I would love to hear a well built system like this, nothing like that here in Memphis though. LIke I said not my thing, but I sure can appreciate the amount and quality of work that went into this thing (and others like it) F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
mlstrass Posted August 27, 2011 Report Posted August 27, 2011 Mine has decent imaging in "daily" mode as I only play the 6.5's in the front of the doors and the bullets in the A pillars. I run everything off toggles and add in the other stuff in the doors and over the wall when in loud demo mode. So it can be done, but again it won't threaten any real SQ vehicles. I used to run AA CF mids/Vifa tweets as the "front" stage, but am happy with the switch to all PA stuff.
n8ball2013 Posted August 27, 2011 Report Posted August 27, 2011 Mine has decent imaging in "daily" mode as I only play the 6.5's in the front of the doors and the bullets in the A pillars. I run everything off toggles and add in the other stuff in the doors and over the wall when in loud demo mode. So it can be done, but again it won't threaten any real SQ vehicles. I used to run AA CF mids/Vifa tweets as the "front" stage, but am happy with the switch to all PA stuff. everytime you mention things you've done makes me want to see a build log lol THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Rainman215 Posted August 27, 2011 Report Posted August 27, 2011 Yea I had the AA CF mids too. Glad I made the switch to a PA setup too... My 02 Accord Wall Build 2 Sundown Audio Nightshade V1 18s --- 1 SAZ 3500 Sundown Audio 100.4 --- 4 Sundown Audio Neo-Pro 8s Sundown Audio 125.2 --- 2 Morel MD-12 Tweeters , 2 Selenium ST-200 Tweeters DC Power 270xp --- 4 XS Power D1200s | 1 D5100R
Recommended Posts
Archived
This topic is now archived and is closed to further replies.