Jump to content
Sonic Electronix

Recommended Posts

Smart cars!!!!!! So little airspace to move ftw. :) lol. Good luck finding a spot for the sub though :) lol

145.9@40hz

145.3@34hz

big 3

X2 group 34

Deka Group 31

All 0/1 awg jl meta wire

Alpine CDA 7894

Orion HCCA D5000

2 AQ HDC312's

Crunch gpv1100.2 (for 6.5"s only)

AQ pro audio 6.5" - 3 sets

AQ supertweeters - 2 sets

2000 Slamry

Link to comment
Share on other sites

ive been leaning toward a blazer they have alot of room and i can fit 24s on them lol

they are pretty nice, the thing i hate is the gas but putting 24s on them is a plus. i have some for sale that would fit right on :ninja:

Link to comment
Share on other sites

Dude ! Look no farther ! THIS is what you need :)

Talk about holding in your SPL's !!! :) Bullet proof glass is standard too ! Plenty of space for a dozen 18"s.... A big diesel motor which set up correctly, could probably make about 3000 amps ! Great way to get started ;)

garda-armored-car.jpg

This would be "The REAL" stereo wagon :)

Peace,

Fish

Right now I have a 2004 ford escape and have horrible voltage problems. I have a sprinter bat in the back and a yellow top up front. I cant do the big three because I would have to drop the front axle. What is the best vehicle for car audio besides a van? I need easy access to the alt and alot of room.

Link to comment
Share on other sites

Tahoes and like gm vehicles are by far most common. Plenty of room for Alts. Lots of cargo space. The only downside IMO is everyone has one.....

Team NWSPL

baaudio Build Log

2001 GMC Sierra walkthrough

4 Mechman Elite 370s, 10 AGM batteries, 3 Crossfire XS v2 18s, Crossfire 8k

Link to comment
Share on other sites

i have 1995 Honda passport and i have been told it is a good stereo truck...put a mechman alt on it all i had to do is stretch the alt bracket...lots of room under the hood and my windows are pretty straight with little curve in them ...side to side it is 49"@wheel wells .i have x2 sundown sa 12"s doin a 145.4 in a midwest legal spl box on music(i think im a 146 since my subs broke in) i run a hifonics hfi2500.1 with 3 extra batts....truck books for $1700 ude with 160k mile so its a good cheap system truck .........hope this helps cause i know i like my truck and its 17mpg

1995 Honda passport 3.2 4x4 Frankenstein on a budget

ballistics sound deader (roof only so far)

kenwood mp3 usb

audio control 3 (upgrading)

hifonics mx-3

3 sets of massive px5 5.25s

3 sets of massive tweets

phonix gold 5.25 componets

x2 massive nx4 nano 200x4 mids

sony xplod 600x4 watt high's

2 Fi bl fully loaded box walled @31ish hz

13.2 cube box/wall

massive DB8000

Excessive amaperge 250 amp alt wir extrnl regulator

daul runs of xs power xpflex 0 gauge

big 3

raptor 0 gauge power/ground wire full run

suriken 45 amp hour x3 shriken bt-120 batts,interstate 1100CA semi batt

scytek galaxy 2way alarm

still upgradeing!

Link to comment
Share on other sites

Right now I have a 2004 ford escape and have horrible voltage problems. I have a sprinter bat in the back and a yellow top up front. I cant do the big three because I would have to drop the front axle. What is the best vehicle for car audio besides a van? I need easy access to the alt and alot of room.

2004 Ford Truck Escape AWD V6-3.0L VIN 1

Vehicle Level Starting and Charging Charging System Alternator Service and Repair

Service and Repair

GENERATOR

REMOVAL

Disconnect the battery cables.

Remove the right intermediate axle shaft.

Remove the right lower splash shield screws and the pin-type retainer.

Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.

Remove the nut and position the bracket and wiring harness aside.

Remove the upper generator mounting bolts.

Remove the lower generator bolts and position the generator aside.

Remove the generator mounting bracket bolts and remove the bracket.

Remove the generator electrical connectors.

1 Remove the B+ nut and cable.

2 Remove the connector.

Rotate the generator to gain clearance, and remove through the opening in the fender well.

INSTALLATION

To install, reverse the removal procedure.

calls for 2.3 labor it is a B**ch but do able i got bored and looked this up on alldata

Edited by extremeauto

1995 Honda passport 3.2 4x4 Frankenstein on a budget

ballistics sound deader (roof only so far)

kenwood mp3 usb

audio control 3 (upgrading)

hifonics mx-3

3 sets of massive px5 5.25s

3 sets of massive tweets

phonix gold 5.25 componets

x2 massive nx4 nano 200x4 mids

sony xplod 600x4 watt high's

2 Fi bl fully loaded box walled @31ish hz

13.2 cube box/wall

massive DB8000

Excessive amaperge 250 amp alt wir extrnl regulator

daul runs of xs power xpflex 0 gauge

big 3

raptor 0 gauge power/ground wire full run

suriken 45 amp hour x3 shriken bt-120 batts,interstate 1100CA semi batt

scytek galaxy 2way alarm

still upgradeing!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1021 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...