carshateme Posted February 9, 2012 Report Share Posted February 9, 2012 Okay, design for 2 type rs 12s Double baffled.. Does this look fine? or did I totally screw up? Quote New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
SQMonte Posted February 9, 2012 Report Share Posted February 9, 2012 Your port height isnt tall enough and you didnt enter the number of common port walls and im sure your displacement isnt right either. Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
OrionStang Posted February 9, 2012 Report Share Posted February 9, 2012 Dipshit Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
SQMonte Posted February 9, 2012 Report Share Posted February 9, 2012 and I think ur baffle thickness is wrong too Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
TankChilton Posted February 9, 2012 Report Share Posted February 9, 2012 Flux capacitor looks like it's out of alignment too. I attempted to use torres, just too stupid to figure it out Quote Link to comment Share on other sites More sharing options...
Joe X Posted February 9, 2012 Report Share Posted February 9, 2012 (edited) Just a few notes, the shared port is twice as thick on the center duct than in it is on the lateral ducts, you don't need the double baffle on this design but if you want to do it then add 0.75 to the depth so you don't go low on internal volume, you need 1.5 cubic feet per sub of net internal airspace (you are low). The T parts you added to the port reduce port area, I believe are not necessary. you need to set common walls to 2, set baffle thickness to 0.75 if you are adding the extra layer. Edited February 9, 2012 by Joe X Quote Link to comment Share on other sites More sharing options...
Lbox88 Posted February 9, 2012 Report Share Posted February 9, 2012 You need to put in "2" as number of common port walls Quote UBL | Build Log Link to comment Share on other sites More sharing options...
carshateme Posted February 9, 2012 Author Report Share Posted February 9, 2012 Okay, so I'm just taking everyone advice it...how does it look now? Quote New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
412 CVX Posted February 9, 2012 Report Share Posted February 9, 2012 (edited) number of common port walls should be 2. and the box is too small make it taller like the first design, just make the port taller along with the box. i.e. the box is 15" tall, port should be 13.5" tall, 2 common port walls. if you're shooting for 1.5 cubes per sub, the box should be ~3 cubes net Edited February 9, 2012 by 412 CVX Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
OrionStang Posted February 9, 2012 Report Share Posted February 9, 2012 number of common port walls should be 3. 2, its a center port. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.