Kyle17 Posted February 23, 2012 Report Share Posted February 23, 2012 I have one Rockford Fosgate 12" T0, model # T0D412, that I bought several months ago. I decided to just buy a pre fab ported box and there was always port noise at most lower frequencies. It has finally bugged me to the point where I'm building my own box. Any ideas or dimensions other than the one recommended in the manual? Since I only have one sub, I'd prefer a ported or 4th order bandpass type enclosure for the most bang for my buck. Quote 1997 Dodge Ram 1500 Ext. Cab Build (2) Rockford Fosgate T0D412s 3.7 cubic foot ported box (1) Rockford Fosgate T2652-S (1) Rockford Fosgate T152 Pioneer AppRadio SPH-DA02 Clarion EQS746 Equalizer Hifonics HFi1500D Hifonics ZXi80.4 Custom Dash Bezel to hold Double DIN Custom amp rack w/ cooling fans Second Skin throughout entire truck Optima red top battery AudioTechnix wiring Link to comment Share on other sites More sharing options...
Joe X Posted February 23, 2012 Report Share Posted February 23, 2012 List the maximum dims you can fit, and the vehicle you are going to install this. Quote Link to comment Share on other sites More sharing options...
Kyle17 Posted February 23, 2012 Author Report Share Posted February 23, 2012 List the maximum dims you can fit, and the vehicle you are going to install this. Max Dimensions: 37" wide x 20" tall x 18" deep THis is for a 1997 Dodge Ram extended cab. I would love to do a crazy wall install and lose the back seat, but the seat comes in handy so for this box it will take up two of the three back seats and place it right on top of the seats. Quote 1997 Dodge Ram 1500 Ext. Cab Build (2) Rockford Fosgate T0D412s 3.7 cubic foot ported box (1) Rockford Fosgate T2652-S (1) Rockford Fosgate T152 Pioneer AppRadio SPH-DA02 Clarion EQS746 Equalizer Hifonics HFi1500D Hifonics ZXi80.4 Custom Dash Bezel to hold Double DIN Custom amp rack w/ cooling fans Second Skin throughout entire truck Optima red top battery AudioTechnix wiring Link to comment Share on other sites More sharing options...
Joe X Posted February 23, 2012 Report Share Posted February 23, 2012 Well this would be a suggestion avoiding heavily any port noise: Enclosure Specifications: Fb = 36 Hz Vb = 2.247 ft^3 Subwoofer Mounting = Flush Mounted External Height = 19 in External Width = 21.75 in External Depth = 18 in Port Width = 2 in Cut List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: Front = 19 x 17 1/2 Front Internal = 17 1/2 x 17 1/2 Back = 21 3/4 x 17 1/2 Left & Right Sides: Side 1 = 16 1/2 x 17 1/2 Side 2 = 17 1/4 x 17 1/2 Top & Bottom = 21 3/4 x 18 L Port Internal Assembly Parts: Front to Back = 14 1/2 x 17 1/2 Extension = 8 1/2 x 17 1/2 Let me know any comments/questions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.