MrSkippyJ Posted May 6, 2012 Report Posted May 6, 2012 play them full tilt, they won't fully break in until you let them fully play. There is no need to play them 1/2 way or anything. Play them on full clean power. It's really that easy. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
AMERICAN BASSHEAD Posted June 12, 2012 Report Posted June 12, 2012 i installed my subs 2 hours before a comp then went and competed all day, there is no such thing as "break in period" if u can loosen a sub up in a few hours its junk Quote
JeremyN Posted June 12, 2012 Report Posted June 12, 2012 hit the amp with the DD1 then let them wang Quote 2 12" Jeff Vue Customs 1 set MB Quart FSB 216 in doors1 American Bass 100.1 on sub1 Hertz EP2 on doorsJVC deck IPOD controlStock 105 amp alt DD-1big 3new build in Chevy caviler http://www.stevemead...chevy-cavalier/last set up in the ZX2 http://www.stevemead...-current-build/old build log http://www.stevemead...-1998-ford-zx2/ Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c that shop needs keep those doors open so they have to charge for it if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol
412 CVX Posted June 12, 2012 Report Posted June 12, 2012 Way to bump up a month old thread, guys. great job. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
safiend Posted June 12, 2012 Report Posted June 12, 2012 Since it was bumped, just play them normal. Had mine for over a month now and still not what I think is broke in. Quote New build coming soon..
Katt Posted June 12, 2012 Report Posted June 12, 2012 i installed my subs 2 hours before a comp then went and competed all day, there is no such thing as "break in period" if u can loosen a sub up in a few hours its junk So you're telling me free airing my sub at 20hz for 6 hours, to loosen suspension makes it junk? Quote *06 330i - Sundern x12 - saz-3500* *91 Foxbody V1 S-Trim Notch*
MrSkippyJ Posted June 12, 2012 Report Posted June 12, 2012 (edited) i installed my subs 2 hours before a comp then went and competed all day, there is no such thing as "break in period" if u can loosen a sub up in a few hours its junk There most certainly is a break in period, there is just no need to do anything different during that time. Any sub will loosen up in a few hours I play time, not sure where you are going with that. Edited June 12, 2012 by MrSkippyJ Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
SnowDrifter Posted June 12, 2012 Report Posted June 12, 2012 Literally, just play them. One of my buddies is pushing his to xmech right out of the gate and had no issues with it. Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
MegaMan93 Posted June 14, 2012 Report Posted June 14, 2012 Just play them at full tilt. No break in needed. Make sure your power is clean. Use the dd-1 and you will be all set to go. Good luck Quote We don't have alot of neighbors so we can blast the stereo.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.