bumassjeff Posted May 14, 2012 Author Report Posted May 14, 2012 34 as stated above. Dur, of course, lol It's definitely a Monday. Thanks again though Joe!
SnowDrifter Posted May 14, 2012 Report Posted May 14, 2012 I'd be worried about loading with that design ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
john253a Posted May 14, 2012 Report Posted May 14, 2012 ive got my 2 in 1.5net with 29sq" of port on 450 rms, soon to be 1000 @14.8v (about 750 @12.4v) @33hz and they sound dam good for only low 400 (200 each) edit jacob's 3 in 1.8net has a single 6" aero @ 16sq"per cuft
bumassjeff Posted May 14, 2012 Author Report Posted May 14, 2012 Nice design, I would prefer more depth and less height though. But that's my bad for not being a little more specific with my space lol. Appreciate the contribution for sure though!
john253a Posted May 14, 2012 Report Posted May 14, 2012 I also no ram has done a few sa8 boxes He might be worth talkin to I've only done 3 and all were my on And all 0.7-0.75 First 17sq" port and it howled Second 28" and I was happy So third was a nice box not a slap together to test like other 2
BassMunky Posted May 14, 2012 Report Posted May 14, 2012 niceee Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
bumassjeff Posted May 15, 2012 Author Report Posted May 15, 2012 type of car And port/sub orientation 08 Ford Escape Subs and Port rear facing
Recommended Posts
Archived
This topic is now archived and is closed to further replies.