MrSkippyJ Posted July 14, 2012 Report Posted July 14, 2012 You used the -10db track. Might be part of the reason. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
SnowDrifter Posted July 14, 2012 Report Posted July 14, 2012 Looks like the coil ripped apart from the cone and hit the dustcap Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
stuntstere Posted July 14, 2012 Author Report Posted July 14, 2012 You used the -10db track. Might be part of the reason. Yeah thats what I was thinking, plus I was playing decaf which is boosted, so I'm sure there was some clipping involved. Quote
Srh_rider12 Posted July 14, 2012 Report Posted July 14, 2012 didn't this happen to another member like 2, 3 days ago?? Quote Build Log ----> http://www.stevemeadedesigns.com/board/topic/137987-04-chevy-silverado-build/page__fromsearch__1
bassface Posted July 14, 2012 Report Posted July 14, 2012 didn't this happen to another member like 2, 3 days ago?? Yeah seems to be a rash of holes in subs lately. Quote
bassface Posted July 14, 2012 Report Posted July 14, 2012 what do you mean one side is open? The meter reads OL. There is an open in the coil on one side of the sub. The other coil reads fine at 1ohm. So would loosing a coil cause this to happen? Yeah means you have a break in the wire somewhere. Quote
CJ18 Posted July 14, 2012 Report Posted July 14, 2012 Over excursion due to a)tuning with a -10 tone and wiring to .5ohm playing boosted music after tuning your system with the -10 tone. That sub also may have a loading issue since it is closer to the port. Did you ever notice it moving more than the other sub? Solution to this would be 1 extra spider on the recone for that sub and shrinking down your box and port area a bit. Quote
andale927 Posted July 14, 2012 Report Posted July 14, 2012 It's not clipping.... You had your subsonic filter set wrong. What is your box tuned to? Quote
CJ18 Posted July 14, 2012 Report Posted July 14, 2012 It looks like you broke the triple joint which caused the coil to hit the dustcap and this is the result. Quote
CJ18 Posted July 14, 2012 Report Posted July 14, 2012 It's not clipping.... You had your subsonic filter set wrong. What is your box tuned to? How do you no there was no clipping? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.