RyanJ Posted August 28, 2012 Report Posted August 28, 2012 Wassssup guys. Hows eveeerybody doing? I was wondering if anyone had any idea on how much it would cost to upgrade my stock cloth seats in my 05 Accord Sedan LX into all leather. Should I just try and find somebody who could just swap it out? Or would I have a better chance of buying a big slab of leather and get somebody to stitch it for me? I just have no idea which is the best way to upgrade to leather seats from cloth. Any suggestions are helpful. Thank you MOB-MOBILE: 2005 Honda Accord 5-Speed System: (1) Sundown Audio SA-15 (1) MB Quart ONX1.1500D (1) Kenwood KDC-248U Speakers: -Rear Dash: (2) Clarion SRQ6932R 6x9's SOLD New MOB-MOBILE: 2011 G37S Sedan System:TBD Instagram (18+) : DabsWitaBudget415
n8ball2013 Posted August 28, 2012 Report Posted August 28, 2012 check out katskinz. It wont be cheap though THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Ram Posted August 28, 2012 Report Posted August 28, 2012 Katskinz is cool. youll be looking at around 900 for the front and rear seats.
79 cutty Posted August 28, 2012 Report Posted August 28, 2012 Otherwise do a little online searching. Not sure if they sell them for your application, but you can purchase seat skins for reasonable, and then just install them yourself. Might need to purchase some hog ring pliers, and hor rings to fully install them....but pretty simple process of stretching the skins tight and attaching them with the hog rings. Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1
roscoe1129 Posted August 29, 2012 Report Posted August 29, 2012 There is alot to consider when doing it yourself. Its not that hatd but there are some tricks. Be sure not to cut any airbag sensors in the process in the accord it is in the front passenger leanback and is held in place close to the listings. Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
87chevyboi Posted August 30, 2012 Report Posted August 30, 2012 if it were me id check all the junkyards and see if they had them for that year model in leather and tell em you want to swap em out and they should cut you a deal. at least around here they do. My build aka Snow White whats wrong with fat chicks? they are like mopeds, as long as your friends dont see you riding it, they are a blast! hahah I am dumb as a stump. I live in the south and we are all dumb here.
SCS_Audio Posted August 30, 2012 Report Posted August 30, 2012 It really depends on the car and how the seats are held together from factory. Hog rings are one way they are held together but a lot of new cars are using other methods. Each of them can be difficult in their own way. Look around your area for some custom upholstery shops. Depending on the seats, it might not be a bad idea to buy the covers and have them install them. They should have everything needed to get them fitting good and snug. 2012 North American Street Stock Runner-up - 150.9 on 1800 clamped watts (Teammate)2013 dB Drag Street Trunk World Champion - 153.9 on 3200 clamped Watts (Teammate)2013 MECA Trunk 1 World Champion - 152.8 Headrest (Teammate)2013 MECA Park & Pound 2 World Champion - 130.6 (Teammate)Checkout our build and videos !! : ) 150+ Trunk Build Log itsgordy1 youtube channel (click for Hairtricks)Smith's Custom SeatsMartinsburg, PA (Second Skin Dealer)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.