Chosen Posted September 1, 2012 Report Share Posted September 1, 2012 http://screensnapr.com/v/PIRw1x.jpg so thats the dimensions and such for my box. how would i be able to find out how many sheets of wood ill need and how i should cut it out on the wood. Link to comment Share on other sites More sharing options...
will77530 Posted September 1, 2012 Report Share Posted September 1, 2012 well you have 49x97 to work with so draw it out on a piece of paper and start subtracting your cuts Link to comment Share on other sites More sharing options...
OrionStang Posted September 1, 2012 Report Share Posted September 1, 2012 First step is to write up your cutsheet. Then draw it like Will said, I start subtracting the biggest cuts first. EDIT: Remember to account for blade width on the cuts. Leave yourself a little wiggle room. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Chosen Posted September 1, 2012 Author Report Share Posted September 1, 2012 oh, didn't think of that. thanks guys. Link to comment Share on other sites More sharing options...
Torres Posted September 1, 2012 Report Share Posted September 1, 2012 there are some programs that will help with this http://ploutab.soft32.com/ http://www.suggestsoft.com/soft/optimal-programs/real-cut-2d/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.