FeelDaBass Posted December 12, 2012 Report Share Posted December 12, 2012 Hi, I was wondering how loud you think my car gets. I really can only go off of the DB charts and maybe some youtube videos and Rockford's R.A.T.S. website. I was running 2 12" P2s in a ported box facing forward partially sealed off from the trunk. Running them off a T1500-1bdCP @ 4 ohms (1000watts). It got pretty loud rolling my passenger window down a couple inches but I really don't know how loud. Next, I recently have made a "high output" box from Rockford's recommendations for the T0d415. I'm currently running it at 8 ohms on the T1500 for now. It is facing the rear of my trunk as close to the back as possible. My backseat does not fold down but has a compartment door in the seat for access to the trunk. How loud would this be? (Could assume I'll wire it to 2 ohms in the future [1500 watts]). This is in my 98 Chrysler Concorde off a stock 130 amp alt with Kicker 0 AWG for power. Any info and maybe even advice would be greatly appreciated! '98 Chrysler Concorde LXiPioneer DEH-80PRS (HU/processing)Rockford Fosgate T1652-S (components) for frontRockford Fosgate T1693 (6x9s) for rearRockford Fosgate T600-4 running thoseRockford Fosgate T1500-1bdCP running a Rockford Fosgate T1D215 15"in a 3.1 cu ft. net tuned to 34 hz (firing in cabin)Kicker PKD1 (0 & 4 AWG)stock 130 amp alt for now; One yellow top OptimaInstalled everything myself & built box (brother helped) Used a DD-1 to set gains. Build Log: http://www.stevemeadedesigns.com/board/topic/165894-first-build-accumulated-since-i-was-14/Just Pics: http://www.stevemeadedesigns.com/board/garage/vehicle/1463-chrysler-concorde-lxi/?tab=images Link to comment Share on other sites More sharing options...
FeelDaBass Posted December 12, 2012 Author Report Share Posted December 12, 2012 Also, 2 12s were ported at 40 htz and the 15" at 38 htz. '98 Chrysler Concorde LXiPioneer DEH-80PRS (HU/processing)Rockford Fosgate T1652-S (components) for frontRockford Fosgate T1693 (6x9s) for rearRockford Fosgate T600-4 running thoseRockford Fosgate T1500-1bdCP running a Rockford Fosgate T1D215 15"in a 3.1 cu ft. net tuned to 34 hz (firing in cabin)Kicker PKD1 (0 & 4 AWG)stock 130 amp alt for now; One yellow top OptimaInstalled everything myself & built box (brother helped) Used a DD-1 to set gains. Build Log: http://www.stevemeadedesigns.com/board/topic/165894-first-build-accumulated-since-i-was-14/Just Pics: http://www.stevemeadedesigns.com/board/garage/vehicle/1463-chrysler-concorde-lxi/?tab=images Link to comment Share on other sites More sharing options...
Neckbeard Posted December 12, 2012 Report Share Posted December 12, 2012 Nobody can guess how loud it is. Too many factors go into it Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
FeelDaBass Posted December 12, 2012 Author Report Share Posted December 12, 2012 I'm not looking for an exact answer, just merely a general guess or range of DBs from personal experiences. '98 Chrysler Concorde LXiPioneer DEH-80PRS (HU/processing)Rockford Fosgate T1652-S (components) for frontRockford Fosgate T1693 (6x9s) for rearRockford Fosgate T600-4 running thoseRockford Fosgate T1500-1bdCP running a Rockford Fosgate T1D215 15"in a 3.1 cu ft. net tuned to 34 hz (firing in cabin)Kicker PKD1 (0 & 4 AWG)stock 130 amp alt for now; One yellow top OptimaInstalled everything myself & built box (brother helped) Used a DD-1 to set gains. Build Log: http://www.stevemeadedesigns.com/board/topic/165894-first-build-accumulated-since-i-was-14/Just Pics: http://www.stevemeadedesigns.com/board/garage/vehicle/1463-chrysler-concorde-lxi/?tab=images Link to comment Share on other sites More sharing options...
n1ghtsn1p3r Posted December 12, 2012 Report Share Posted December 12, 2012 Nobody can guess how loud it is. Too many factors go into it This.Your best bet would be to find somebody in your area with a TermLab. I couldn't find anybody near you with one on the map on this thread: http://www.stevemeadedesigns.com/board/topic/137758-smd-audio-tools-map/ There might be some shops or somebody else not listed that might have one. 2016 Ford Focus SE No build log yetDC Audio 1.2K2x DC Audio Level 2 10" Link to comment Share on other sites More sharing options...
AK bass Posted December 12, 2012 Report Share Posted December 12, 2012 the high out put box might put out 143db maybe, but only the term lab knows for sure "The secret to creativity is knowing how to hide your sources." Albert Einstein Link to comment Share on other sites More sharing options...
FeelDaBass Posted December 12, 2012 Author Report Share Posted December 12, 2012 Alright, I haven't looked around too hard but I'm pretty sure there's not a whole lot where I am. Thanks for the map anyway. '98 Chrysler Concorde LXiPioneer DEH-80PRS (HU/processing)Rockford Fosgate T1652-S (components) for frontRockford Fosgate T1693 (6x9s) for rearRockford Fosgate T600-4 running thoseRockford Fosgate T1500-1bdCP running a Rockford Fosgate T1D215 15"in a 3.1 cu ft. net tuned to 34 hz (firing in cabin)Kicker PKD1 (0 & 4 AWG)stock 130 amp alt for now; One yellow top OptimaInstalled everything myself & built box (brother helped) Used a DD-1 to set gains. Build Log: http://www.stevemeadedesigns.com/board/topic/165894-first-build-accumulated-since-i-was-14/Just Pics: http://www.stevemeadedesigns.com/board/garage/vehicle/1463-chrysler-concorde-lxi/?tab=images Link to comment Share on other sites More sharing options...
TeamHT Posted December 12, 2012 Report Share Posted December 12, 2012 About "this" loud. Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
wmrcs Posted December 12, 2012 Report Share Posted December 12, 2012 I'm going to guess about 165, 167 area. On a serious note.. you're likely in mid-low 30's. E34 540iT/6 Link to comment Share on other sites More sharing options...
alaskanzx5 Posted December 12, 2012 Report Share Posted December 12, 2012 i say mid to high 30s maybe low 40s. that box is gonna have to small of port area and don't run 1500watts to that speaker. its rated at what? 600rms?? it doesn't handle heat as well, i wouldn't recommend over 800-1000rms. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.