MarioB Posted January 31, 2013 Report Posted January 31, 2013 Started a wall in my car you can check out my build log for some tips. Its titled MarioBs tomb of boom. 12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodcsoundlab.com Quality is all in how you take pictures I have plenty of projects that look WAY better on camera then in person crazy to fit so many in so little. Reminds me of some of the porns I've seen?
WillPwn4Food Posted January 31, 2013 Author Report Posted January 31, 2013 Started a wall in my car you can check out my build log for some tips. Its titled MarioBs tomb of boom. I giggled a bit at "tomb of boom" Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus.
tacomaguy1 Posted January 31, 2013 Report Posted January 31, 2013 kreg jig to screw the top on...or whatever piece you can't get to the other side of and need to attach it from the inside Team Flex Issues
stroupe79 Posted January 31, 2013 Report Posted January 31, 2013 see alot of people using angle iron or corner braces/L brackets to help secure panels, like these.... http://www.lowes.com/pd_315689-1277-DPB113_0__?productId=3169843&Ntt=l+bracket+hardware&pl=1¤tURL=%3FNtt%3Dl%2Bbracket%2Bhardware&facetInfo= http://www.stevemead...cherokee-build/ 2005 Jeep Grand Cherokee Alpine CDE-hd148bt Alpine PKG-RSE2 PRV Audio (4) 6MB200 front/rear doors PRV Audio (4) TW350Ti dash/rear doors Kicker KX350.4 Obsidian Audio (1) 18 D4 v2 revamp (2) Stereo Integrity HT 18d2DC Audio 1.2k5.25ft^3 tuned @34hz revamp Infinite Baffle Cpillar AudioTechnix 60mil deadenerKnuKonceptz & SkyHigh wire (complete setup)
hondakid1996 Posted January 31, 2013 Report Posted January 31, 2013 I used L brackets of varying sizes to secure the parts I couldn't normally screw together. I also used pl premium to hold it all together and also beaded it inside and out for a complete seal. That combined with a good bit of 2x3 bracing and im confident in its strength. So far its holding up great with my 2 18's.
bighossf150 Posted January 31, 2013 Report Posted January 31, 2013 see alot of people using angle iron or corner braces/L brackets to help secure panels, like these.... http://www.lowes.com/pd_315689-1277-DPB113_0__?productId=3169843&Ntt=l+bracket+hardware&pl=1¤tURL=%3FNtt%3Dl%2Bbracket%2Bhardware&facetInfo= Thats what Im doing with mine 2x2x1/8" angle iron in each seam on the inside Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s
WillPwn4Food Posted January 31, 2013 Author Report Posted January 31, 2013 Aaahhhh of course! I forgot about that! Good call. That'll do good with fiberglass. How port area everyone suggest? Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus.
WillPwn4Food Posted January 31, 2013 Author Report Posted January 31, 2013 How much port*? Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus.
tacomaguy1 Posted January 31, 2013 Report Posted January 31, 2013 How much port*? depends on how big the box ends up being common rule of thumb is around 14-17" of port per cubic ft. Team Flex Issues
Recommended Posts
Archived
This topic is now archived and is closed to further replies.