Jump to content

Recommended Posts

So very soon here, I will be starting a Wall build in my Taurus (By soon I mean On Saturday if the deal selling my N2's goes through)... I'll be running 4 VVX15's on (2) Planet Audio BB2400.1's (Realistically each amp only puts out about 2000wrms). I was wondering... Is a 150db @ 30hz an unrealistic goal? I want it to essentially be a low-end monster, but I still want it to be musical. Any recommendations what to tune it to without sacrificing too much SQ because of the low tuning?

Edited by WillPwn4Food

Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893

real men dont use fuses :D

Neither do morons
Says the guy with lambo doors on his Ford Taurus.
Link to comment
Share on other sites

Why are you worried about SQ at 150 db's?

I still want it to be a somewhat musical setup. I don't want it to fail on the higher bass tones. 45hz etc. Heard some setups fail on anything above 35 when they're tuned too low.

Edited by WillPwn4Food

Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893

real men dont use fuses :D

Neither do morons
Says the guy with lambo doors on his Ford Taurus.
Link to comment
Share on other sites

Maybe if your tuned in the high 20s

I'm personally gonna say you need more power and won't hit a 150 under 40hz

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

Link to comment
Share on other sites

Maybe if your tuned in the high 20s

I'm personally gonna say you need more power and won't hit a 150 under 40hz

I think this is realistic. Low notes take power.

My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee

My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37

My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/

2016 Mazda 6 Touring

JL Fix 86 - OEM signal correction

B2 prototype DSP 6to8

B2 Ref63 - 3 way active set

2 B2 Class H quattro's

1 B2 Zero.5R @.5

2 B2 HNv3 12 d2

B2 SLIP40 - Lithium in the trunk

Northstar Group 35 under the hood

100ft 2/0 welding cable

30ft 4ga welding cable

20ft 8ga welding cable

All stinger OFC speaker wire

Soundrive custom RCA's

Tons of attention to detail.... Can it be perfect?

Link to comment
Share on other sites

You need to worry less about numbers.

Build it, see how it sounds and go from there.

i shook this one kids hand and it just folded in mine. long story short i fucked his girlfriendso.. yeah..

You want this to happen to you? Give decent handshakes people.

I was gifted with an innate ability to distribute wholesale ass beatings in a timely and orderly fashion.
Link to comment
Share on other sites

I know someone that has done it out of a trunk no wall with less than 5k so I say its possible

:ninja:

Cabin gain like a mofo????

down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups

^^ Cant wait to swalllow Ghost's babies

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1310 Guests (See full list)

×
×
  • Create New...