moh.vze.com Posted February 16, 2008 Report Posted February 16, 2008 How old is she? DC Audio - Singer Alternators - Knukonceptz - XS Power - Hybrid Audio - Rockford Fosgate - Second Skin Audio - SMD - Sundown Audio - Elemental Designs
banginAltima Posted February 16, 2008 Report Posted February 16, 2008 How old is she? thats the mans wife.... does it matter? If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs
moh.vze.com Posted February 16, 2008 Report Posted February 16, 2008 thats the mans wife.... does it matter? JK DC Audio - Singer Alternators - Knukonceptz - XS Power - Hybrid Audio - Rockford Fosgate - Second Skin Audio - SMD - Sundown Audio - Elemental Designs
tejcurrent Posted February 18, 2008 Author Report Posted February 18, 2008 No info on the wife She's my age, lets leave it at that lol. Updates! Pics uploading now. Painting the port and around the sub opening: The Bracing/amp rack begining The amp had no means of attatching it?! normally there are places to screw in, but there was nothing on the amp, or in the box (and I bought it new). Had to get a little creative. tejcurrent XS Power T3
Aaron813 Posted February 18, 2008 Report Posted February 18, 2008 I hate it when amps dont have a screw tab on them
tejcurrent Posted February 18, 2008 Author Report Posted February 18, 2008 Heres the platform for the amp Putting the platform in place, it has plenty of room on all sides for the air to circulate. Theres a pic of the block holding it in place at the top. closeup of the block and how snug it holds the amp The block in question Coming together, I got the hole cut for the logo to show through A bit closer shot Of course a 3/4 round over Test fitting with the amp in place tejcurrent XS Power T3
tejcurrent Posted February 18, 2008 Author Report Posted February 18, 2008 Carpeting the box And the trim plate And all carpeted And with the sub sat in to test fit Still have to screw the trim plate in, but I'm waiting to hook up all the wires and test everything. Then I'll have to tune the amp too, so just sitting it on for now. Wiring it up. It's so simple, those jumpers really make for a clean appearance. Screwing it in place and putting the rubber cover on. Kind of unique, not many subs do anything fancy, I'm sure that's why my wife likes it lol. Everyones worried about ventilation. 2.5" holes let some air in and make running wires to the amp easy. And in the trunk The panel still isn't secured, and this is a night time pic. I ran all the wires, but I ran out of 4 guage fuse holders. I'm a ground and a power wire away from having this up and running as long as everything else is hooked up correctly. Testing it out and metering it friday. tejcurrent XS Power T3
dmanson Posted February 18, 2008 Report Posted February 18, 2008 man that's very very creative with what you did on with the box man. i like it !!!!!!! 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
kbreudi Posted February 18, 2008 Report Posted February 18, 2008 looks great man very creative TEAM SUNDOWN 4 Nightshade 15"s 2 Sundown SAZ-4500 8 Deep Cycle batts 1998 Cadillac Catera SPLMAX CUP 2008 Fourth Place Overall
Recommended Posts
Archived
This topic is now archived and is closed to further replies.