Hotdog Posted April 8, 2013 Author Report Share Posted April 8, 2013 I was told by someone else to check to make sure with the update 2013 software that the K-Factor matches the sensor. I got two laptops setup now one with 2012 termlab and the other 2013 termlab software. If I get a chance I will check. (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Hotdog Posted April 8, 2013 Author Report Share Posted April 8, 2013 Ok so I looked at the stock setting for 2012 termlab and 2013 termlab and here are the screenshots. now the K-factor on my meter is 178.1 but I dont know that it would through results of by 3-4db with being off .3 tenths on the K-factor. 2012 Termlab stock settings 2013 Termlab stock settings (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
SLAYER1805 Posted April 8, 2013 Report Share Posted April 8, 2013 Yes yes yes. Just an iasca show today, everybody score was down 5-7db. I lost 7 on the glass and 7 in the port. But a couple of weeks ago same Equipement previous show we were all doing our normal numbers. So yes something happened, don't know what, but something!Yeah that IASCA SHOW fucking blew today Low scores for everybody? I guess the meter we used down here yesterday isn't the 2013 software, everybody's score seemed normal and Jeremy Boyd hit 160 lol Link to comment Share on other sites More sharing options...
fox_racin4 Posted April 8, 2013 Report Share Posted April 8, 2013 wayne at it again.... 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Bacy2k Posted April 22, 2013 Report Share Posted April 22, 2013 anybody have an update on this? Alpine CDA-9886Hertz Mille 3 ways active Hertz SPL Show 8's 2 Audison Voce Quattro's2 DC Audio M2 Level 5 12'sDC Audio 12.0KKnuKonceptz Wiring4 XS Power D3100'sDC Power 390XPSecond Skin Damplifier Pro and Dynamat Xtreme Link to comment Share on other sites More sharing options...
purplesyrup Posted April 22, 2013 Report Share Posted April 22, 2013 back around 2000 the TL got "fine tuned" and everyone lost around 7db, so people doing 150's were all of a sudden doing 143's Another update, 13 years later, where you loose another 5-7db's? I know we all trust the TL, but how much can you trust something that one day says your at 150, then update and now your only ding 43's? if it was 7 db's off the whole time? How accurate is that Link to comment Share on other sites More sharing options...
CNF Kevosinn Posted April 22, 2013 Report Share Posted April 22, 2013 wow this is insane *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution Link to comment Share on other sites More sharing options...
P4killer_ Posted April 22, 2013 Report Share Posted April 22, 2013 Good ole tl. It's your computers I'm sure people. Not running up to date chipsets etc.. USB drivers fucking up. Buy a whole new laptop. It'll work then Hahah Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
purplesyrup Posted April 22, 2013 Report Share Posted April 22, 2013 if it is currently right with the new update, then the TL has been followed to be the the most accurate for absolutely no reason at all for years Link to comment Share on other sites More sharing options...
larrys95civic Posted April 22, 2013 Report Share Posted April 22, 2013 can someone get me a copy, every time I attempt to update something is going wrong and I can't get a full file. I'll send you a flash drive or give you money buy one and send it to me. We are having a test and tune show soon and I can't get it to work at all. Team Superior SPL Former Installer at Driven Sound & Security http://www.drivenss.com All kinds of forsale threads http://www.stevemeadedesigns.com/board/topic/164247-amps-subs-and-misc/#entry2383262 http://www.stevemeadedesigns.com/board/topic/164430-polk-audio-sda6000-sound-bar/#entry2386634 http://www.stevemeadedesigns.com/board/topic/164279-3-michael-kors-watches/#entry2383983 http://www.stevemeadedesigns.com/board/topic/164549-more-items-from-storage/ http://www.stevemeadedesigns.com/board/topic/166967-dd-9518s-amps-kenwood-custom-explorer-dash/ If someone is feeling generous I'd love an original sig LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.