Jump to content
Second Skin Audio

tuning question (port)


what would you do  

5 members have voted

  1. 1. pick one

    • 36 hz with 12.54 port area per foot
      0
    • 32-33 hz with just under 12 port area per foot
      5


Recommended Posts

i listen to decaf. box is 7 cubic foot before displacement. using 4 10s on ok power. About 1/2 power each.

love the lows. after displacement is gunna be right around 5.5 to 6cu.ft rough guess.

need an answer to what would best suit my needs.

thanks guys

i think there real i was looking through that guys stuff he sells and it looks like he finds stuff at auctions and just sells it

Yea, it looks like someone got the mids about a month ago....shit. If I had a whole Hertz front stage my ears would jizz all over my cheeks.

/ LOL

My Low Budget Build:

Green 1995 Subaru Legacy wagon 147k- $1K

headunit- pioneer premier deh-p650-$25

4 Lead acid batts. 1 up front and 3 in back- vented outside.- $50

4 vvme L11 10"s <- $30 shipped a piece

6 cu. ft box (after displacment) tuned to 32ish hz with 10 inch sonotube. -about $50 all together maybe a lil more

2 aspm 1300 strapped

Selenium 6"s in the front doors on headunit power- for now -$20

quantum tweets in door-for now -$10

boston acoustic 5 1/4 in rear doors- for now-Free

big 3

1/0 and 4awg throughout.

roof sound deadened (not peel n seal ftw)-free

on 80 amp alt (bench tested to put out 100 amps faithfully) <--?-$10 for test

about $430 for everything<----Not bad at all

still gotta add 3 way crossover, amp for front and rear door speakers and maybe eq

Link to comment
Share on other sites

Link to comment
Share on other sites

probably about 600 watts rms (150 a piece)

lower tuning would use a 10 inch sonotube. higher tuning was a couple 4 inch pvc pipes.

in a subaru legacy. and 4 vvme 10 inch cheapo's $30 shipped each lol on the vvme qa 1000.1 D

but i was thinkn the same thing about not being able to tell the difference but wanted another opinion on it...

thanks guys :)

i think there real i was looking through that guys stuff he sells and it looks like he finds stuff at auctions and just sells it

Yea, it looks like someone got the mids about a month ago....shit. If I had a whole Hertz front stage my ears would jizz all over my cheeks.

/ LOL

My Low Budget Build:

Green 1995 Subaru Legacy wagon 147k- $1K

headunit- pioneer premier deh-p650-$25

4 Lead acid batts. 1 up front and 3 in back- vented outside.- $50

4 vvme L11 10"s <- $30 shipped a piece

6 cu. ft box (after displacment) tuned to 32ish hz with 10 inch sonotube. -about $50 all together maybe a lil more

2 aspm 1300 strapped

Selenium 6"s in the front doors on headunit power- for now -$20

quantum tweets in door-for now -$10

boston acoustic 5 1/4 in rear doors- for now-Free

big 3

1/0 and 4awg throughout.

roof sound deadened (not peel n seal ftw)-free

on 80 amp alt (bench tested to put out 100 amps faithfully) <--?-$10 for test

about $430 for everything<----Not bad at all

still gotta add 3 way crossover, amp for front and rear door speakers and maybe eq

Link to comment
Share on other sites

Link to comment
Share on other sites

If you listen to decaf then tune it low.. or make the box on the large side. small port area tuned to 34ish would sound good imo.

I voted lower tune for your music preference

Walled 2002 buick century A.K.A "Betty sue"

polk 5 1/2 front doors

4 3in pillar speakers

DD 3518's

AQ 3500 v2

90ft of 0/1 ga

tuned to 40hz

:build: http://www.stevemeadedesigns.com/board/topic/162721-buick-built-in-trunk-fi-sp4-hifonics-2400/

Link to comment
Share on other sites

messed around on torres a lil more and got it @ 33 hz with almost 14 inch port area with a 10 inch sonotube. 14 inch inside the box 10 inch outside..... KILLS the lows.

steering wheel flex on low power ftw.

thanks guys! i will have a video up 2marrow!

i think there real i was looking through that guys stuff he sells and it looks like he finds stuff at auctions and just sells it

Yea, it looks like someone got the mids about a month ago....shit. If I had a whole Hertz front stage my ears would jizz all over my cheeks.

/ LOL

My Low Budget Build:

Green 1995 Subaru Legacy wagon 147k- $1K

headunit- pioneer premier deh-p650-$25

4 Lead acid batts. 1 up front and 3 in back- vented outside.- $50

4 vvme L11 10"s <- $30 shipped a piece

6 cu. ft box (after displacment) tuned to 32ish hz with 10 inch sonotube. -about $50 all together maybe a lil more

2 aspm 1300 strapped

Selenium 6"s in the front doors on headunit power- for now -$20

quantum tweets in door-for now -$10

boston acoustic 5 1/4 in rear doors- for now-Free

big 3

1/0 and 4awg throughout.

roof sound deadened (not peel n seal ftw)-free

on 80 amp alt (bench tested to put out 100 amps faithfully) <--?-$10 for test

about $430 for everything<----Not bad at all

still gotta add 3 way crossover, amp for front and rear door speakers and maybe eq

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 1295 Guests (See full list)

×
×
  • Create New...