boom50cal Posted May 17, 2013 Author Report Share Posted May 17, 2013 That wiring is really clean man nice job! I love me some fi too! How hard were your seats to get out I have a different car but they are impossible to get out even with my impact... sorry for the thread jack Not a thread jack bud They were 13mm bolts, I got them out with a 13mm deep dish socket and a 3/8ths inch drive ratchet. I pulled them out by myself too, which was a pain in the ass. It took my 130lb self a good 30 minutes to pull them out. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
SMZ2 Posted May 17, 2013 Report Share Posted May 17, 2013 That wiring is really clean man nice job! I love me some fi too! How hard were your seats to get out I have a different car but they are impossible to get out even with my impact... sorry for the thread jackNot a thread jack bud They were 13mm bolts, I got them out with a 13mm deep dish socket and a 3/8ths inch drive ratchet. I pulled them out by myself too, which was a pain in the ass. It took my 130lb self a good 30 minutes to pull them out.That impact may have done more harm than good then...time to go find the bigger of my two ratchets lol. Thanks man My Build Log!http://www.stevemead...nissan-xterror/ Check the Youtube Channel for Updates!http://www.youtube....ser/Xterror2002And Seller Feedbackhttp://www.stevemeadedesigns.com/board/topic/163179-bought-from-smz2/#entry2363713 Link to comment Share on other sites More sharing options...
boom50cal Posted May 17, 2013 Author Report Share Posted May 17, 2013 No problem. Whenever you get them out though, put some antiseize on the bolts. It'll stain your carpet if your not careful, but it will make removing them a whole lot less of a task the next time you have to. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
bigmescan Posted May 17, 2013 Report Share Posted May 17, 2013 thats how i will keep mine ported aswell. towards passenger wall. just waiting for my new 8's SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
Smoove Posted May 17, 2013 Report Share Posted May 17, 2013 That wiring is really clean man nice job! I love me some fi too! How hard were your seats to get out I have a different car but they are impossible to get out even with my impact... sorry for the thread jack I have a 96 1500, seats came out with no problems. Air ratchet is your friend. 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
boom50cal Posted May 17, 2013 Author Report Share Posted May 17, 2013 Slowly collecting new body parts from my accident back in December. SWB + rain x industrial use road with oil on it = said SWB truck spinning into a ditch. Anyway, new fender and grill-to-bumper trim piece. All I need is a new bumper and valance. When I get all that replaced, I'm probably going to ditch all the molding and shit on the sides. I already ditched the tail light covers. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
COLTON94 Posted May 17, 2013 Report Share Posted May 17, 2013 Truck will look good without the moldings, just be careful gettin em off so you dont take the paint with it. Link to comment Share on other sites More sharing options...
boom50cal Posted May 18, 2013 Author Report Share Posted May 18, 2013 Truck will look good without the moldings, just be careful gettin em off so you dont take the paint with it. I've taken the wheel well ones off before. I'll talk to my body shop guy about the other ones. I might just get him to get them off the doors and stuff. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
boom50cal Posted May 21, 2013 Author Report Share Posted May 21, 2013 Anyone who is following this, I'd appreciate it if y'all keep us Oklahoman families in your thoughts. A LOT of the state has been torn up by a couple tornadoes, one being an F5, today and a lot of carnage has been dealt, and even some lives, have been lost. I haven't been affected yet, hope I don't, but nonetheless, an Oklahoman is an Oklahoman to me, and any and all thoughts will be appreciated. Depending on what I do tomorrow after school, I'm going to pull my subbox and rewire it with some Sky High wire I have. I have some stain too, I might even stain it tomorrow if it isn't rainy and humid. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
boom50cal Posted May 21, 2013 Author Report Share Posted May 21, 2013 Ran some more Sky High wire today. Replaced the Schosche "14 gauge" that I was using in and out of the box with some of my 14 gauge Sky High wire. Original shit, OFC low strand count, wasn't half bad for free. And Now some Sky High 14 gauge! Little comparison, bet you guys already know the winner... Bolt terminals ftw! All done! Still deciding on what to do the box in... I've got some stain in the shop, it's walnut. Then I've got some woodfiller and Satin black paint out there too... I've got enough wood out there to do an amp rack too, just not enough larger wire(1/0, 4, and 8 is getting ordered through SkyHigh in the following weeks) lol. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.