CJ18 Posted May 18, 2013 Report Share Posted May 18, 2013 Seems to me the question was more about the scope being used than questioning the product. It was said that the scope used might not be as accurate as a Fluke, but when clamping an amp like that, almost accurate could be the difference in 500w or more one way or the other. Also not to mention Tony D's tearing apart of the traditional clamping method. Needs a dyno run! Link to comment Share on other sites More sharing options...
Miguels Posted May 18, 2013 Report Share Posted May 18, 2013 new to forum and post this.. he is not a noob but if you read it right you can tell its not an average joe. and the way he talks about the amp is like he is selling it.. i wouldnt doubt he is the owner or works for flat line. even when Jacob or anyone here does a clamp they dont seem like trying to sell it. not trashing it and it has good numbers but its fishy how he goes on talking about the amp. and funny how someone on this forum clamped a flat line and only got 5800 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
bighossf150 Posted May 18, 2013 Report Share Posted May 18, 2013 new to forum and post this.. he is not a noob but if you read it right you can tell its not an average joe. and the way he talks about the amp is like he is selling it.. i wouldnt doubt he is the owner or works for flat line. even when Jacob or anyone here does a clamp they dont seem like trying to sell it. not trashing it and it has good numbers but its fishy how he goes on talking about the amp. and funny how someone on this forum clamped a flat line and only got 5800 just......no Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s Link to comment Share on other sites More sharing options...
ToNasty Posted May 18, 2013 Report Share Posted May 18, 2013 he does not own flatline ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Flatline1 Posted May 18, 2013 Report Share Posted May 18, 2013 Taylor is not the owner and is not affiliated with Flatline he just does clamp test for us because he is a very trusted person on forums and he does them the correct way. All is doing is giving you guys information on the amplifiers and as far as the clamp test that was done by berger if you read the thread you will see he said the 8.5 was 1 db away from what 2 DC5ks were strapped so unless your saying Dc amps suck i would think the 8.5 did nore than 5800w. There will be a test done by Taylor on a 8.5 here soon when the next run gets here so stay tuned. http://www.facebook....FlatlineAudioLA Co-owner Flatline Audio Link to comment Share on other sites More sharing options...
TeamHT Posted May 18, 2013 Report Share Posted May 18, 2013 T Fade is a pretty legit dude. And the most I see this being off of an actual fluke is a very small amount if any. He could have used higher voltage but stayed where he thought was decent. Decent clamp since the other clamp didn't really shine. A dyno run would be fun to see Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
Miguels Posted May 18, 2013 Report Share Posted May 18, 2013 5800 would be a more accurate number with the inputs and amperage the dual 1/0 can deliver.. Saz 4500 dual inputs 5500 at 1 ohm DC 5.0 k dual inputs 5600 at 1 ohm BC 5500 dual inputs 5500 at 1 ohm EDit: need to read better and confused it with the 9k my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted May 18, 2013 Report Share Posted May 18, 2013 not bashing and if it does 7500 then that cool my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
ToNasty Posted May 18, 2013 Report Share Posted May 18, 2013 ive been waiting for youguys to come overhere Taylor is not the owner and is not affiliated with Flatline he just does clamp test for us because he is a very trusted person on forums and he does them the correct way. All is doing is giving you guys information on the amplifiers and as far as the clamp test that was done by berger if you read the thread you will see he said the 8.5 was 1 db away from what 2 DC5ks were strapped so unless your saying Dc amps suck i would think the 8.5 did nore than 5800w. There will be a test done by Taylor on a 8.5 here soon when the next run gets here so stay tuned. ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
ToNasty Posted May 18, 2013 Report Share Posted May 18, 2013 you need to hurry upn on the subs now ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.