Wood's -2011 Altima- AKA "Red Ruby" : New Build (pg.150) #SpringBling

[islandpride684]

I usually mix

body filler mixed too hot just gets hard faster and is harder to spread not nearly as bad as resin mixed too hot

Thanks for the heads up!!!! I was getting nervous about that part! I'm glad that is the only thing I have to worry about!! Thanks for all the tips, it's really been helpful!!

When I do bondo work, I mix it with some acetone to make it nice and soft and its easier to spread...a little tip I learned from Tim at Audiotistics...

Is there any videos on this method?

He does it after applying it but I just add the acetone to the filler and then I do what he does in the vid afterwards to smooth it out...

[Wood]

I usually mix

body filler mixed too hot just gets hard faster and is harder to spread not nearly as bad as resin mixed too hot

Thanks for the heads up!!!! I was getting nervous about that part! I'm glad that is the only thing I have to worry about!! Thanks for all the tips, it's really been helpful!!

When I do bondo work, I mix it with some acetone to make it nice and soft and its easier to spread...a little tip I learned from Tim at Audiotistics...

Is there any videos on this method?

He does it after applying it but I just add the acetone to the filler and then I do what he does in the vid afterwards to smooth it out...

Thank you!! I will take a look at this!!

[Leo1103]

Pods are looking great man! I haven't checked in in a while but what's the plan for them?

[Wood]

Pods are looking great man! I haven't checked in in a while but what's the plan for them?

Thank you, you should come visit me more often hahaha.... The plans for the pods are to run 2 sets of Hertz HSK165s, They will be reverse mounted, the pod itself will be wrapped in factory matched vinyl that I purchased and the middle have bezels that will be covered in speaker grill cloth!

[Leo1103]

Its only like a 26 hour drive lol, those should come out awesome, can't wait for more pics

[Wood]

Its only like a 26 hour drive lol, those should come out awesome, can't wait for more pics

LOLOL I meant on my thread hahaha.. that's a long ass drive LMAO!!!! I think so too! I'm anxious (but trying to be patient lol)... I'm in full build mode, so a lot of updates are and will be happening! I plan on having it finished by the end of October!

[mbdblue]

damn man second try came out mint. Lookin good so far

[Wood]

damn man second try came out mint. Lookin good so far

Thanks bro!! I'm a quick learner.. One thing I can say, is I don't make the same mistakes twice, so I'm glad I did make them in the beginning stages because now I know how to handle the rest of the project! Thanks for checking out my build!!

[Leboy23]

Holy hell then gonna be some nice doors. You gotta let me here them when you're finished. Nice work bro!

[Swordlordboy1234]

Don't mean to burst your bubble but the multiple tweeter in multiple locations would ruin your whole investment of these awesome speakers. You will have crazy amounts of cancellation from having tweeters bouncing off your windsheild and having to blend them with ones in your doors.

In fact once you do all that work, I'd put a crisp $100 bill on it that your imaging and localization would be royally screwed up and it would almost instantly fix if you disconnected the ones in the stock location.

Please get the tweeters closer to each other and if not at least make them face the same direction. I really don't wanna see $1000 in bad ass mids and highs fall on their face.