Budlight863 Posted October 16, 2013 Report Share Posted October 16, 2013 So like the topic says do you put the screw on top if the rubber or do i pull the rubber a little to the side to put the screw i pull the rubber to the side but i just want to make sure i did it right i have the zv4's i did it that way because the rubber did not alighn with the holes in the basket in using spax screws thanks Quote Link to comment Share on other sites More sharing options...
ToNasty Posted October 16, 2013 Report Share Posted October 16, 2013 i pull the rubber bacl and uses bolts and nuts if its a heavy sub Quote ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
S15_Silvia Posted October 16, 2013 Report Share Posted October 16, 2013 I don't screw my subs though some people around this board talk about doing it a lot Quote 2016 Subaru BRZ | Sony XAV-AX100 | Rockford Fosgate DSM 4080 & DSM 40ix | On 6/6/2012 at 6:32 PM, 'LZTYBRN' said: 3. Don't put speakers outside the car unless you are the ice cream man. My feedback thread Link to comment Share on other sites More sharing options...
Awhitewookie Posted October 16, 2013 Report Share Posted October 16, 2013 I used 3" lag screws. Each sub is 62lbs and my baffle is 3 layers thick Quote MY BUILD 1998 Ford Explorer 2dr sport 1/0 Big 3 1/0 everything Alpine cda-9884 Crescendo CZ components (2) Crescendo bc2000's (2) Jolt 150ah (2) Yellow top optimas (1) Juicebox black cherry addition (1) Mechman 270 avbm miss my bc5500 and (4) 15's You know why people are ass holes online but not in person? Because getting punched in the mouth hurts. Link to comment Share on other sites More sharing options...
Awhitewookie Posted October 16, 2013 Report Share Posted October 16, 2013 Mine don't have rubber for it so I just used washers to prevent any digging in and even pressure Quote MY BUILD 1998 Ford Explorer 2dr sport 1/0 Big 3 1/0 everything Alpine cda-9884 Crescendo CZ components (2) Crescendo bc2000's (2) Jolt 150ah (2) Yellow top optimas (1) Juicebox black cherry addition (1) Mechman 270 avbm miss my bc5500 and (4) 15's You know why people are ass holes online but not in person? Because getting punched in the mouth hurts. Link to comment Share on other sites More sharing options...
STEALTH808 Posted October 16, 2013 Report Share Posted October 16, 2013 I don't screw my subs though some people around this board talk about doing it a lot werent you the one requesting the woofer porn vid the other day? Quote TEAM SUNDOWN HAWAIIHAWAIICARAUDIO.NET 150Db Club 160Db club in the future I see krakin as a threat Link to comment Share on other sites More sharing options...
81000D Posted October 16, 2013 Report Share Posted October 16, 2013 Clip the shit out of it that should screw it good lol. Just pull the gasket off and realign it. Quote Link to comment Share on other sites More sharing options...
Crandis16 Posted October 16, 2013 Report Share Posted October 16, 2013 Whatever floats your bubble dude. Sometimes I switch it up. I can screw through the holes in the rubber just fine, but my large screws don't like to come out through the rubber. I'm going to try socket head cap screws next with the female machine thread end to hold it. Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
CstrokerV Posted October 16, 2013 Report Share Posted October 16, 2013 im going to try the kreg tool screws if the heads are big enough Quote my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.