Jump to content

That Loud Focus...USAlternators Hairpin, 4 DD 9515i's in a B pillar on 2 Soundstream XXX-15K's. Caps and Lithium Power. New vids


Recommended Posts

Its going to be damn near impossible to gain 6 dbs sealed without a box change.

And I dont think a c pillar wall is the answer either.

.02 cents

Its also going to be almost impossible to gain 6 with half blown subs lol.

i'm not going for numbers. that's not why I wanna do a c pillar. I just wanna do it

to do it. I have pretty much everything I need to build it. just gotta find time.

I wish you would have hear it with the second amp though. it was loud. but I'm goanna do

what I wanna do. and if it doesn't turn out well, I can always rebuild it.

2007 Ford Focus SES Hatchback

Pioneer HU

4 Digital Designs 9515i's in a B pillar.

2 Soundstream XXX 15K's (running at 16 volts)

Soundstream Mids/Highs in custom door panels (getting rebuilt soon)

Soundstream TA2.160 and TA2.400

Sky High and KNU wiring

3 Banks of Maxwell caps 

Winston Lithium (not a fan)

Bump4Life 250 Amp Alt. aka USAlternators

Soundstream Focus and Avenger Build Log

Instagram @p4linnovation

YouTube: Team Blowin Loud 

Link to comment
Share on other sites

Tuned for the rebuild.... Hopefully you'll get that fifty

750??! Yeah, fuck that. Fuck this website, fuck SMD, fuck Steve, fuck all of his butt buddy mods, and their couches.

^ DON'T BE A DICK LIKE THIS GUY :)

Team Subsonic Lows

Link to comment
Share on other sites

c pillar with 2 15's on 5k is gonna be a fuckfest to place at any big shows. A 'nendo 5500 with a similar setup to what you have, and you are still in stock 751-1500. Maybe even superstock, idk exactly how you would be placed. (usaci)

Flaring the ports and upping electrical upped me over a db, along with deadening just one rear passenger door since it flexed really, really, really bad. Also, I'm not sealed off 100%, so still room to grow.

Is there any way you can fit a pair of 6's instead of all the 4's?

On 1/4/2013 at 9:31 PM, HatersGonnaHate said:

Wow. 184 posts and I think you're a fucking asshole.

 

Link to comment
Share on other sites

I have both the zx3 and zx5. Trunks measure the same on them.

The back doors on the zx5 do flex. Haven't found a fix for that.

What ever you choose to do good luck with it and ill be watching.

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

Hey man, I mean that's just my personal opinion but dude its your's and from what I have seen you got a good setup. I still gotta figure out what I am going to do... Unfortunately I'm in my senior year of high school and plan on going to college or at least tech school... But hey. Its what ever. When I get outta tech school I'm going to probably either get a new focus that I can drive around and this one will become the project car. Looking forward to your build though!

2000 Ford Focus ZX3

Mods:

Raceland Coilovers

Borla Exhaust

Aftermarket Header

System:

Sony CDX-GT66UPW

Pioneer 6x8's

System Upgrades :

Pioneer MVH-X560BT

2 sets of Rockford Fosgate P1683's

Fi Audio Q 18" D2 ( Currently Own)

DD M1C ( Currently Own)

All SHCA Wires and stuff...

XS Power 4800 ( Stock Replacement)

High Ouput alternator (undecided which company or Amperage.)

Link to comment
Share on other sites

c pillar with 2 15's on 5k is gonna be a fuckfest to place at any big shows. A 'nendo 5500 with a similar setup to what you have, and you are still in stock 751-1500. Maybe even superstock, idk exactly how you would be placed. (usaci)

Flaring the ports and upping electrical upped me over a db, along with deadening just one rear passenger door since it flexed really, really, really bad. Also, I'm not sealed off 100%, so still room to grow.

Is there any way you can fit a pair of 6's instead of all the 4's?

I don't plan on competing (might do it for fun though). It's just for demoin and show. also, I plan on eventually running 12K but until then it will be 6K.

and what do you mean by 6's and 4's lol

I have both the zx3 and zx5. Trunks measure the same on them.

The back doors on the zx5 do flex. Haven't found a fix for that.

What ever you choose to do good luck with it and ill be watching.

Thanks man. and ya i'm pretty sure im goanna go with a c pillar but who knows. we shall see

Hey man, I mean that's just my personal opinion but dude its your's and from what I have seen you got a good setup. I still gotta figure out what I am going to do... Unfortunately I'm in my senior year of high school and plan on going to college or at least tech school... But hey. Its what ever. When I get outta tech school I'm going to probably either get a new focus that I can drive around and this one will become the project car. Looking forward to your build though!

lol i'm in my senior year as well. that's why I wanna do a c pillar. that way I still have my back seats for my first year of college. then I plan to do a b pillar eventually

when I get a second car. idk who knows things change. but we will see what happened.

2007 Ford Focus SES Hatchback

Pioneer HU

4 Digital Designs 9515i's in a B pillar.

2 Soundstream XXX 15K's (running at 16 volts)

Soundstream Mids/Highs in custom door panels (getting rebuilt soon)

Soundstream TA2.160 and TA2.400

Sky High and KNU wiring

3 Banks of Maxwell caps 

Winston Lithium (not a fan)

Bump4Life 250 Amp Alt. aka USAlternators

Soundstream Focus and Avenger Build Log

Instagram @p4linnovation

YouTube: Team Blowin Loud 

Link to comment
Share on other sites

c pillar with 2 15's on 5k is gonna be a fuckfest to place at any big shows. A 'nendo 5500 with a similar setup to what you have, and you are still in stock 751-1500. Maybe even superstock, idk exactly how you would be placed. (usaci)

Flaring the ports and upping electrical upped me over a db, along with deadening just one rear passenger door since it flexed really, really, really bad. Also, I'm not sealed off 100%, so still room to grow.

Is there any way you can fit a pair of 6's instead of all the 4's?

I don't plan on competing (might do it for fun though). It's just for demoin and show. also, I plan on eventually running 12K but until then it will be 6K.

and what do you mean by 6's and 4's lol

Port size. All those 4 inch round ports has to kill efficiency vs 2 6's. Or even a single 8 inch.

On 1/4/2013 at 9:31 PM, HatersGonnaHate said:

Wow. 184 posts and I think you're a fucking asshole.

 

Link to comment
Share on other sites

What kinda job do you have Jesus.... I dont know how i would afford all that gear though...

2000 Ford Focus ZX3

Mods:

Raceland Coilovers

Borla Exhaust

Aftermarket Header

System:

Sony CDX-GT66UPW

Pioneer 6x8's

System Upgrades :

Pioneer MVH-X560BT

2 sets of Rockford Fosgate P1683's

Fi Audio Q 18" D2 ( Currently Own)

DD M1C ( Currently Own)

All SHCA Wires and stuff...

XS Power 4800 ( Stock Replacement)

High Ouput alternator (undecided which company or Amperage.)

Link to comment
Share on other sites

c pillar with 2 15's on 5k is gonna be a fuckfest to place at any big shows. A 'nendo 5500 with a similar setup to what you have, and you are still in stock 751-1500. Maybe even superstock, idk exactly how you would be placed. (usaci)

Flaring the ports and upping electrical upped me over a db, along with deadening just one rear passenger door since it flexed really, really, really bad. Also, I'm not sealed off 100%, so still room to grow.

Is there any way you can fit a pair of 6's instead of all the 4's?

I don't plan on competing (might do it for fun though). It's just for demoin and show. also, I plan on eventually running 12K but until then it will be 6K.

and what do you mean by 6's and 4's lol

Port size. All those 4 inch round ports has to kill efficiency vs 2 6's. Or even a single 8 inch.

I believe they are 3'' ports.

Brandon

2000 Furd Ranger supercab 4x4

System:

welding wire throughout the truck

USalts 390amp Hairpin

Juicebox in stock location

8 Banks of maxwell supercaps

2 American Bass Vfl 1100.1 wired to .35 each

2 Fi Audio Sp4 18's ( the DD sc 9918's smoked)

Pioneer radio with Soundstream PA mids Powered by a nice sized soundstream 2 channel

It's pronounced (dain-ja rain-ja) :ph34r:

 

2001 2 door focus

1 DD9918 SC 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 832 Guests (See full list)

×
×
  • Create New...