Pauly1987 Posted January 12, 2014 Report Share Posted January 12, 2014 Question: Kicker zx650.4 has two 40amp fusing on the amp itself! I have it wired and powered with a short run of 0 gage wire maybe a foot long run, it is connected directly from the spare battery bank in the back with no fusing on the wire itself! Should I fuse the wire? I only ask because the amp already has inboard fusing! Paul Link to comment Share on other sites More sharing options...
MrSkippyJ Posted January 12, 2014 Report Share Posted January 12, 2014 yes, as close to the battery as possible. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Rich Schenk Posted January 12, 2014 Report Share Posted January 12, 2014 yes fuse the wire or ya can blow up your amp. 12in from the batt On 3/28/2014 at 4:22 PM, KyLar96 said: Its all about the music anyway..... Do a proper install, something your happy with, Fuck everyone else...... improve in time, where you can..... its not rocket science... Tiburon build //www.stevemeadedesigns.com/board/topic/174059-97-hyundai-tiburon-build-from-ramming-to-slamming-slow-5k-build/ 2000 Mountaineer build http://www.stevemeadedesigns.com/board/topic/186736-2000-mountaineer-build-from-ramming-to-slamming-part-iislow-5k-builddc-audio-americanbassxspowersingerarcaudiostingershcavideo-on-pg7/ 2000 Mercury Mountaineer: Electrical:Singer 360 hairpin powdercoated white alt, Big 4 double run 1/0 SHCA OFC, 4 runs 1/0 OFC SHCA, limitless 70ah, HU: Pioneer deh80prs interiors: Skar sk85.4 on sb acoustics neo dome tweeters 2 Mmats sq4100s on 4 silver flute 8s(4ohm) SUB Stage: 3 DC5K [email protected] on 6 ascendant audio mayhem 12s d1.4s fully loaded Link to comment Share on other sites More sharing options...
JeremyN Posted January 12, 2014 Report Share Posted January 12, 2014 yes fuse the wire or ya can blow up your amp. 12in from the batt you dont fuse the wire to keep from blowing the amp you fuse to protect the car and occupants. thats basic info 2 12" Jeff Vue Customs 1 set MB Quart FSB 216 in doors1 American Bass 100.1 on sub1 Hertz EP2 on doorsJVC deck IPOD controlStock 105 amp alt DD-1big 3new build in Chevy caviler http://www.stevemead...chevy-cavalier/last set up in the ZX2 http://www.stevemead...-current-build/old build log http://www.stevemead...-1998-ford-zx2/ Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c that shop needs keep those doors open so they have to charge for it if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 12, 2014 Report Share Posted January 12, 2014 yes fuse the wire or ya can blow up your amp. 12in from the battyou dont fuse the wire to keep from blowing the amp you fuse to protect the car and occupants. thats basic info Correct. If something in the amp causes the line in fuse to blow. Your amp is now gonzo. You (if you choose) fuse the amp line in, it's to protect the run in. That's all. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Neckbeard Posted January 12, 2014 Report Share Posted January 12, 2014 It can save your car from burning to the ground, kinda worth it. Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
Pauly1987 Posted January 12, 2014 Author Report Share Posted January 12, 2014 On it! Thanks Link to comment Share on other sites More sharing options...
hazestorm23 Posted January 13, 2014 Report Share Posted January 13, 2014 Question: Kicker zx650.4 has two 40amp fusing on the amp itself! I have it wired and powered with a short run of 0 gage wire maybe a foot long run, it is connected directly from the spare battery bank in the back with no fusing on the wire itself! Should I fuse the wire? I only ask because the amp already has inboard fusing! Paul better to be safe than sorry especially since its in the back and out of view Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.