Pauly1987 Posted February 6, 2014 Report Share Posted February 6, 2014 Hey guys is there a salution to this problem! With the big three under the hood I noticed the area were the paint Got shaved off seems to be starting to rust! Is there somthing I can spray on there after I sand the rust off! Link to comment Share on other sites More sharing options...
SLAYER1805 Posted February 6, 2014 Report Share Posted February 6, 2014 When me and my cousin did the grounds in his 76 Blazer we sanded down the surface to bare metal and gave it a few coats of some Rustoleum when everything was installed. Not sure if its the proper method due to conductivity but thats what we did and haven't had a problem with it in the past 3 years Link to comment Share on other sites More sharing options...
Amart88 Posted February 6, 2014 Report Share Posted February 6, 2014 Take them off, Clean them up, put them back on and spray some paint or white lithium grease over them. My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Pauly1987 Posted February 6, 2014 Author Report Share Posted February 6, 2014 Ok sounds like an easy fix! Thanks Link to comment Share on other sites More sharing options...
alaskanzx5 Posted February 6, 2014 Report Share Posted February 6, 2014 Yeah like they said, just clean them off reconnect the grounds and paint over it. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Rich Schenk Posted February 6, 2014 Report Share Posted February 6, 2014 Clean off rust then dielectric greese connections. Then spray paint over them On 3/28/2014 at 4:22 PM, KyLar96 said: Its all about the music anyway..... Do a proper install, something your happy with, Fuck everyone else...... improve in time, where you can..... its not rocket science... Tiburon build //www.stevemeadedesigns.com/board/topic/174059-97-hyundai-tiburon-build-from-ramming-to-slamming-slow-5k-build/ 2000 Mountaineer build http://www.stevemeadedesigns.com/board/topic/186736-2000-mountaineer-build-from-ramming-to-slamming-part-iislow-5k-builddc-audio-americanbassxspowersingerarcaudiostingershcavideo-on-pg7/ 2000 Mercury Mountaineer: Electrical:Singer 360 hairpin powdercoated white alt, Big 4 double run 1/0 SHCA OFC, 4 runs 1/0 OFC SHCA, limitless 70ah, HU: Pioneer deh80prs interiors: Skar sk85.4 on sb acoustics neo dome tweeters 2 Mmats sq4100s on 4 silver flute 8s(4ohm) SUB Stage: 3 DC5K [email protected] on 6 ascendant audio mayhem 12s d1.4s fully loaded Link to comment Share on other sites More sharing options...
Amart88 Posted February 6, 2014 Report Share Posted February 6, 2014 Clean off rust then dielectric greese connections. Then spray paint over them Dielectric greases and such won;t last long exposed to the weather. Better off with paint or re-applying grease every so often. I use white lithium myself. My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
SnowDrifter Posted February 6, 2014 Report Share Posted February 6, 2014 I put some vaseline on mine. Both between the lug and connection, and on top of the lug itself. Seems to be working a year and a half later ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
SnowDrifter Posted February 6, 2014 Report Share Posted February 6, 2014 Clean off rust then dielectric greese connections. Then spray paint over them Dielectric greases and such won;t last long exposed to the weather. Better off with paint or re-applying grease every so often. I use white lithium myself. Just as an FYI - lithium grease is soap like. It will wash out with water. Dielectric grease is silicone based, and should work better for this ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Amart88 Posted February 6, 2014 Report Share Posted February 6, 2014 Clean off rust then dielectric greese connections. Then spray paint over them Dielectric greases and such won;t last long exposed to the weather. Better off with paint or re-applying grease every so often. I use white lithium myself. Just as an FYI - lithium grease is soap like. It will wash out with water. Dielectric grease is silicone based, and should work better for this Probably true but mine had lasted all fall and winter so far. Will likely switch in the spring. My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.