tacomaguy1 Posted July 12, 2014 Report Share Posted July 12, 2014 Probably be going 4 amps at .7 from 2 amps at .35 Curious to see what happens, idk if I'll gain but should be more efficient Team Flex Issues Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 12, 2014 Author Report Share Posted July 12, 2014 Probably be going 4 amps at .7 from 2 amps at .35 Curious to see what happens, idk if I'll gain but should be more efficient can i help you out there???? exactly what ill be doing. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 12, 2014 Author Report Share Posted July 12, 2014 pm in bound timmy SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
gckless Posted July 12, 2014 Report Share Posted July 12, 2014 I'll be running at .7 once my SHD gets in. D1.4, so my original plan was to do comparisons between 2.8 ohms and see what it's like. "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 12, 2014 Author Report Share Posted July 12, 2014 I'll be running at .7 once my SHD gets in. D1.4, so my original plan was to do comparisons between 2.8 ohms and see what it's like. i have a feeling, .7 is gonna be PERFECT... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
gckless Posted July 12, 2014 Report Share Posted July 12, 2014 I'll be running at .7 once my SHD gets in. D1.4, so my original plan was to do comparisons between 2.8 ohms and see what it's like.i have a feeling, .7 is gonna be PERFECT... I'm hopin so. Was just gonna do 1 ohm but wanted to squeeze a little extra power out of this 5k. Plus, I'm more an SQL guy so I may end up wiring to 2.8 for most of the time anyway. Not sure yet, testing will reveal. But for a lot of people, I think anything over 1 resistive is gonna be good enough. I may end up trying out a Brazilian just so I can get power at the higher load. "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography Link to comment Share on other sites More sharing options...
THEKINGsBACK Posted July 12, 2014 Report Share Posted July 12, 2014 DAMN DAMN DAMN DAMN DAMN..... after i just had made up my mind.. time to go back to the drawing board.. reading this opened my eyes mind and my damn wallet. thanks kylar96 he wouldnt be the first to say they did a 167 with a system like that (one that clearly DOESNT), but i have to say, he didnt beat me anywhere, ive never competed against the guy. If he thinks his does a 167, mine would probably put him in a coma. :hairtrick: Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 12, 2014 Author Report Share Posted July 12, 2014 We'll again. Every ones build will show different. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Weigel21 Posted July 12, 2014 Report Share Posted July 12, 2014 Yeah, I figured it was SPL oriented, seems majority of the members on here travel that route. There are many amplifiers that can produce a good chunk of power at 2 ohms, though no single amplifier "I'm" aware of that can produce the 1000's of watts many on here are looking to get. Strapping two amplifiers together ran at 2 ohms could get a few thousand watts of clean power though. Again, I don't see anyone who's in need of 3K+ to likely be in any interest of seeking SQ above all else. True SQ setups don't run multiple subs with 1000's or watts to them. Now I'm sure many would claim they are seeking SQ, but in truth are actually seeking clarity in the output, which that can be achieved with the power levels many on here run, though I have much doubt that any real clarity can be retained when dropping below 1 ohm and "I" personally feel dropping below 2 ohms causes the clarity to noticeably suffer. Link to comment Share on other sites More sharing options...
gckless Posted July 12, 2014 Report Share Posted July 12, 2014 Yeah, I figured it was SPL oriented, seems majority of the members on here travel that route. There are many amplifiers that can produce a good chunk of power at 2 ohms, though no single amplifier "I'm" aware of that can produce the 1000's of watts many on here are looking to get. Strapping two amplifiers together ran at 2 ohms could get a few thousand watts of clean power though. Again, I don't see anyone who's in need of 3K+ to likely be in any interest of seeking SQ above all else. True SQ setups don't run multiple subs with 1000's or watts to them. Now I'm sure many would claim they are seeking SQ, but in truth are actually seeking clarity in the output, which that can be achieved with the power levels many on here run, though I have much doubt that any real clarity can be retained when dropping below 1 ohm and "I" personally feel dropping below 2 ohms causes the clarity to noticeably suffer. http://www.xplicitaudio.com/taramps-hd-8000-1-ohm/ http://mobileaudioforum.com/forum/showthread.php?6913-My-test-Taramps-HD8000&highlight=taramps But it's Brazilian, so going poof on low electrical scares me. Once I get some caps though, this might be mine. "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.