Masterbasser Posted November 12, 2014 Author Report Share Posted November 12, 2014 im getting 6.5 inches on my google searches ,was just curious the one on my vehicle is 6 inches so its a 3 alternators rotations per minute to 1 engine rotation per minute i would get a little less amperage then you per engine rotation still very nice and they are 600 bucks not bad at all. im thinkin mechman does not make these alternators they are made by a different company http://store.billetalternator.com/320-amp-ford-alternator-with-6-rib-pulley-machined-finish/ these even have a 10 year performance guarantee and 20k rpm capable very nice Kenwood excelon ddx795 3 370 amp CES alternators (audio side only) McLaren dome tweeters Crescendo 6.5 ultra neos NVX JAD800.4 4 PA x4 SPL 18's 4 Digital Designs m5's at .7 ohms each 2 K2 80 ah lithiums 3 group 31 agms Ledglow million color (12 piece) 2007 Yukon xl Link to comment Share on other sites More sharing options...
poorfish88 Posted November 12, 2014 Report Share Posted November 12, 2014 Singer DC Mechman Not sure if this had been stated yet.... All others I would avoid..... Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted November 12, 2014 Report Share Posted November 12, 2014 im getting 6.5 inches on my google searches ,was just curious the one on my vehicle is 6 inches so its a 3 alternators rotations per minute to 1 engine rotation per minute i would get a little less amperage then you per engine rotation still very nice and they are 600 bucks not bad at all. im thinkin mechman does not make these alternators they are made by a different company http://store.billetalternator.com/320-amp-ford-alternator-with-6-rib-pulley-machined-finish/ these even have a 10 year performance guarantee and 20k rpm capable very nice Nope same company read the about section. The logo is basically the same even. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Miguels Posted November 12, 2014 Report Share Posted November 12, 2014 im getting 6.5 inches on my google searches ,was just curious the one on my vehicle is 6 inches so its a 3 alternators rotations per minute to 1 engine rotation per minute i would get a little less amperage then you per engine rotation still very nice and they are 600 bucks not bad at all. im thinkin mechman does not make these alternators they are made by a different company http://store.billetalternator.com/320-amp-ford-alternator-with-6-rib-pulley-machined-finish/ these even have a 10 year performance guarantee and 20k rpm capable very nice those are built by mechman. they are beast my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Guest Posted November 12, 2014 Report Share Posted November 12, 2014 Link to comment Share on other sites More sharing options...
walwalka Posted November 12, 2014 Report Share Posted November 12, 2014 im getting 6.5 inches on my google searches ,was just curious the one on my vehicle is 6 inches so its a 3 alternators rotations per minute to 1 engine rotation per minute i would get a little less amperage then you per engine rotation still very nice and they are 600 bucks not bad at all. im thinkin mechman does not make these alternators they are made by a different company http://store.billetalternator.com/320-amp-ford-alternator-with-6-rib-pulley-machined-finish/ these even have a 10 year performance guarantee and 20k rpm capable very nice Billet-tech is mechman..... ^ proof so you can't question it. 2010 Honda Civic LX / Deck: Kenwood DDX371 / Front Highs: Crescendo RTS-1 / Front Mids: Silver Flute 6.5's / 4 channel: DC Audio 90.4 / Sub: Fi 15in SP4v2 / Sub amp: Taramps HD 5000 / Power wire: Knukonceptz OFC 1/0 / Deadener: Audio Technix 60 mil / Batteries: XS Power D5100R / Rear bank: TBD / Alternator: Singer 240a hairpin Link to comment Share on other sites More sharing options...
Masterbasser Posted November 14, 2014 Author Report Share Posted November 14, 2014 After alot of research and countless questions and hours of reading and watching videos I have decided to go with the Mechman billet tech hairpin 3g alternator. I'd like to thank everyone for your input and on helping me to discover these hairpin alternators. (Matthew is the only 1 making them for my application) I will post some pics when I get it. Kenwood excelon ddx795 3 370 amp CES alternators (audio side only) McLaren dome tweeters Crescendo 6.5 ultra neos NVX JAD800.4 4 PA x4 SPL 18's 4 Digital Designs m5's at .7 ohms each 2 K2 80 ah lithiums 3 group 31 agms Ledglow million color (12 piece) 2007 Yukon xl Link to comment Share on other sites More sharing options...
Lbox88 Posted November 14, 2014 Report Share Posted November 14, 2014 UBL | Build Log Link to comment Share on other sites More sharing options...
Kyblack76 Posted November 14, 2014 Report Share Posted November 14, 2014 SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Guest Posted November 20, 2014 Report Share Posted November 20, 2014 I called them about an alt for my new hyundai SUV Tom told me that they are working on it but dont have one yet When I mentioned Singer he said that is just rebadged mechman..... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.