madnking Posted November 11, 2014 Report Posted November 11, 2014 I have started a c pillar wall in my 2007 cherokee. 2 dc lvl6 18s dual 2s incriminator ia80.1 amp 3 6 in aero ports. My box is roughly 13 cubes before all displacements. My 3 6inch aeros are 15 inches long flare to flare and 6 inches off back wall. It sounds ok. Doesnt seem to move a lot of air and is not as loud as I might have thought am I ok on the port area and I tried to tune for 33 hz am I in the ball park? Thanks for your help.
sencheezy Posted November 11, 2014 Report Posted November 11, 2014 Maybe more port area? Definately need to seal from the rear. That will make a huge difference in output. I'm gonna assume you have the electric for those amps yes? Are you monitoring your voltage? 165db with 237 DC Volts 6 15" SSA Evils 3 HV Taramps T60k @.33 18 XS Power D3400s Add me on SC, FB, IG, and YT @ Sencheezy
Kyblack76 Posted November 11, 2014 Report Posted November 11, 2014 maybe make it a REAL wall ? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
ToNasty Posted November 11, 2014 Report Posted November 11, 2014 add 1 more 6" areo ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
madnking Posted November 11, 2014 Author Report Posted November 11, 2014 I stated I have started a wall didny want to seal it all in until the box is right
madnking Posted November 11, 2014 Author Report Posted November 11, 2014 I have steady voltage above 13.2 at idle
tacomaguy1 Posted November 11, 2014 Report Posted November 11, 2014 Only 6.5" of port per cube No real rule but that's not enough Team Flex Issues
Kyblack76 Posted November 11, 2014 Report Posted November 11, 2014 I have steady voltage above 13.2 at idle voltage isnt the issue... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Recommended Posts
Archived
This topic is now archived and is closed to further replies.