Broke_Audio_Addict Posted December 22, 2014 Report Share Posted December 22, 2014 CT Sounds AT7000.1dBest? Reliable? I don't know if it's the best or most reliable, I think it you have the right electrical, solid grounds, and you read the company specs for their products... you'll get good results with any company. I know I'd like to have one, because it has 3 inputs.3 inputs and a tendency to catch fire. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted December 22, 2014 Report Share Posted December 22, 2014 That t.f.e. though That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
TaylorFade Posted December 22, 2014 Report Share Posted December 22, 2014 Ampere 7500 Ampere TFE DC 7.5k DC 9k DC 10k DC 12k Sundown NS-1 IA 80.1 AB 750.1 AB 1000.1 AB 1100.1 AB 18k B2 M1s B2 M1 Mki B2 M1 mkii B2 M1u Flatline BA3 Flatline El Jefe' DD M4a JBL Crown GTi a6000 Cactus K9 Crossfire 8k Zapco ZX 6.5k Zapco ZX 10k Zapco ZX 26k Ground Zero 1.8k-HC Ground Zero 1.10k-HC AQ20k Stetsom 7k, 9k, 11k, 14k, 15k, 25k, 35k, 60k, 80k SounDigital 12k, 20k, 25k, 35k, Unlimited Taramps 8k, 10k, 14k, 20k, 30k, 50k Banda 7k ... just off the top of my head. Link to comment Share on other sites More sharing options...
STEvil Posted December 22, 2014 Report Share Posted December 22, 2014 7K all day, 7K for a dozen demos, or 7K burp? lol MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
PaulPumpsBass Posted December 22, 2014 Author Report Share Posted December 22, 2014 Ampere 7500 Ampere TFE DC 7.5k DC 9k DC 10k DC 12k Sundown NS-1 IA 80.1 AB 750.1 AB 1000.1 AB 1100.1 AB 18k B2 M1s B2 M1 Mki B2 M1 mkii B2 M1u Flatline BA3 Flatline El Jefe' DD M4a JBL Crown GTi a6000 Cactus K9 Crossfire 8k Zapco ZX 6.5k Zapco ZX 10k Zapco ZX 26k Ground Zero 1.8k-HC Ground Zero 1.10k-HC AQ20k Stetsom 7k, 9k, 11k, 14k, 15k, 25k, 35k, 60k, 80k SounDigital 12k, 20k, 25k, 35k, Unlimited Taramps 8k, 10k, 14k, 20k, 30k, 50k Banda 7k ... just off the top of my head. THIS is the type of post I'm looking for, I'm looking for options and brand and model I may have never heard of! THANK YOU! 7K all day, 7K for a dozen demos, or 7K burp? lol 7k for all day play, it's gonna be my daily driver, but I'll be doing demos too. No 7k burps. 1994 Mazda RX7 with LS1 Swap and 2 - 10" Kicker L7's in Truck Boxes (because of extremely limited hatch space) 2003 GMC Yukon XL with 3 - 12" MTX 9500's and still has the third row seat (over 7.5 cu ft of enclosures behind third row) 1971 Chevrolet Nova with LS1 Swap (work in progress, most likely 4 - 12" Alpine Type R's as I already have them) 1961 Chevrolet Corvette Restomod with LS7 Swap (system upgrade will be one of the first things that I'll do) Solo Basshead For The Most Part, None Of My Close Friends Have A Passion For It, Nor The Money For It. If I'm Home And Free... Always Looking To Meet Up With A Fellow Enthusiast To Talk Shop Or Do Demos! Hard To Find Fellow Bassheads (Not Crack or Heroin Addicts, I Can Find Them Everywhere) In Baltimore / Mid-Atlantic / DMV areas. Link to comment Share on other sites More sharing options...
PaulPumpsBass Posted December 22, 2014 Author Report Share Posted December 22, 2014 CT Sounds AT7000.1dBest? Reliable? I don't know if it's the best or most reliable, I think it you have the right electrical, solid grounds, and you read the company specs for their products... you'll get good results with any company. I know I'd like to have one, because it has 3 inputs.3 inputs and a tendency to catch fire. Come on, I'm not trying to get the thread locked. 1994 Mazda RX7 with LS1 Swap and 2 - 10" Kicker L7's in Truck Boxes (because of extremely limited hatch space) 2003 GMC Yukon XL with 3 - 12" MTX 9500's and still has the third row seat (over 7.5 cu ft of enclosures behind third row) 1971 Chevrolet Nova with LS1 Swap (work in progress, most likely 4 - 12" Alpine Type R's as I already have them) 1961 Chevrolet Corvette Restomod with LS7 Swap (system upgrade will be one of the first things that I'll do) Solo Basshead For The Most Part, None Of My Close Friends Have A Passion For It, Nor The Money For It. If I'm Home And Free... Always Looking To Meet Up With A Fellow Enthusiast To Talk Shop Or Do Demos! Hard To Find Fellow Bassheads (Not Crack or Heroin Addicts, I Can Find Them Everywhere) In Baltimore / Mid-Atlantic / DMV areas. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted December 22, 2014 Report Share Posted December 22, 2014 Fair enough. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
CstrokerV Posted December 22, 2014 Report Share Posted December 22, 2014 thought you where doing a 20k to 30k rms build shouldn't you be looking into like 2 to 3 10k amps my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
Masterbasser Posted December 22, 2014 Report Share Posted December 22, 2014 atomic is good shit, strong amps, compares to all the top shit 3 year warranty too, best in the business 5k does bout 7500 on 18 volts, call em up if ur interested but not if ur gonna waste their time, they dont like that if ur lookin at the website its totally outdated, they have all those subs but most specs are wrong, the superx and apxx subs is discontinued also Kenwood excelon ddx795 3 370 amp CES alternators (audio side only) McLaren dome tweeters Crescendo 6.5 ultra neos NVX JAD800.4 4 PA x4 SPL 18's 4 Digital Designs m5's at .7 ohms each 2 K2 80 ah lithiums 3 group 31 agms Ledglow million color (12 piece) 2007 Yukon xl Link to comment Share on other sites More sharing options...
PaulPumpsBass Posted December 22, 2014 Author Report Share Posted December 22, 2014 thought you where doing a 20k to 30k rms build shouldn't you be looking into like 2 to 3 10k amps My plan is to do (6) 15s (most likely Fi SP4, DC Level 5 or 6, DD 9900, PSi Platform 3, Sundown NSv3, Tantric HDD or SHD, B2 XC, etc)... so I'll probably run 3 amps, at least 7k each. That's the goal, but all these subs should be able to take 4k each daily... so I'm looking for 7k or larger. atomic is good shit, strong amps, compares to all the top shit 3 year warranty too, best in the business 5k does bout 7500 on 18 volts, call em up if ur interested but not if ur gonna waste their time, they dont like that if ur lookin at the website its totally outdated, they have all those subs but most specs are wrong, the superx and apxx subs is discontinued also Awesome, I'm just researching now... I'm not in the US, since I'm not there... I'm homeless. I have nowhere to send anything that I'd buy. But I will be home by summer 2015, so I'm just shopping and trying to figure out what equipment I'll ultimately go with. I'll definitely look into Atomic though. THANKS! 1994 Mazda RX7 with LS1 Swap and 2 - 10" Kicker L7's in Truck Boxes (because of extremely limited hatch space) 2003 GMC Yukon XL with 3 - 12" MTX 9500's and still has the third row seat (over 7.5 cu ft of enclosures behind third row) 1971 Chevrolet Nova with LS1 Swap (work in progress, most likely 4 - 12" Alpine Type R's as I already have them) 1961 Chevrolet Corvette Restomod with LS7 Swap (system upgrade will be one of the first things that I'll do) Solo Basshead For The Most Part, None Of My Close Friends Have A Passion For It, Nor The Money For It. If I'm Home And Free... Always Looking To Meet Up With A Fellow Enthusiast To Talk Shop Or Do Demos! Hard To Find Fellow Bassheads (Not Crack or Heroin Addicts, I Can Find Them Everywhere) In Baltimore / Mid-Atlantic / DMV areas. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.