SnowDrifter Posted March 14, 2015 Report Posted March 14, 2015 - The conductors shall be pre-tinned. - There shall be at least 3 turns around each conductor and the wraps shall be tight with no gaps between adjacent turns. - The wraps shall not overlap and the ends of the wrap shall be trimmed flush prior to soldering to prevent protruding ends. - Conductors shall not overlap the insulation of the other wire. - Solder shall wet all elements of the connection. - The solder shall fillet between connection elements over the complete periphery of the connection. More here if you're curious http://www.hq.nasa.gov/office/codeq/doctree/87394.pdf ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
audiofanaticz Posted March 14, 2015 Report Posted March 14, 2015 thats actually how i solder my wires together. though I dont go through the work of pre tinning them.
SnowDrifter Posted March 14, 2015 Author Report Posted March 14, 2015 NO NASA FOR YOU ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
audiofanaticz Posted March 14, 2015 Report Posted March 14, 2015 it was the only way I found to keep the 2 wires twisted together. dont know how people do it differently tbh. didnt know it was how nasa did it tho. lol but I hold my 2 wires to form an X and then just start twisting both sides. with my thumb and pointer finger.
ChevyBoy95 Posted March 14, 2015 Report Posted March 14, 2015 thats actually how i solder my wires together. though I dont go through the work of pre tinning them. same here. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
Wicks Posted March 15, 2015 Report Posted March 15, 2015 Agree. I've done this many times to join wires but I don't tin them first, much easier to twist the wires un-tinned and then solder afterwords and make sure the solar penetrates the strands sufficiently. This post sent with 100% recycled electrons. 2004 BMW M3Mechman 280A 2 - XS Power XP30001 - XS Power D375 500F of Maxwell SuperCaps (soon to be 1000F) iPadMini2Dash mounted O-scopeAudison bitOne (Remote DRC MP) Highs Amp - PPI Art A404 Hertz HSK130 (HSK165 waiting...) DC Audio DC9.0K 2- DC Audio XL12m2LEGAL - 147.3dB @ 41Hz OUTLAW - 150.2dB @ 45Hz OUTLAW - 145.7dB @ 30Hz JUNE 2014 SOTM WINNER 2014 COLORADO PEOPLE'S CHOICE WINNER SOTM BUILD:http://www.stevemeadedesigns.com/board/topic/141656-wicks-e46-m3-build-bass-turbo-button-and-a-big-new-addition/page-68#entry2802026
Broke_Audio_Addict Posted March 15, 2015 Report Posted March 15, 2015 Same way I just soldered my radio harness minus the pre-tinning, I thought that's how everyone did it. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
Colin - STAPUFT Posted March 15, 2015 Report Posted March 15, 2015 SHALL Stuff reads like the 10 commandments of wire splicing. hehe 12 - 12"s in the STAY PUFT 1989 Chevy Astro Build & Comment Log Un-Interrupted Build LogYouTube Channel Chevy Trailblazer 5.1 Dolby Digital DTS Install You have a beard of a mysterious sea captain. I would follow you to hell and back.
Broke_Audio_Addict Posted March 15, 2015 Report Posted March 15, 2015 SHALL Stuff reads like the 10 commandments of wire splicing. hehe Nasa be like. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.