audiofanaticz Posted April 24, 2015 Report Posted April 24, 2015 I mean, 2 volts on my saz-4500s is about 120 watts, which is not even noticible by the ear, or a several hundred dollar piece of gear for measuring the spl of the vehicle... 2 volts on a tiny 2 channel is going to be like 5-10 watts.... lol
n8ball2013 Posted April 24, 2015 Report Posted April 24, 2015 That's my point. It's probably still within threshold especially when tested on a bench 1 THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Broke_Audio_Addict Posted April 24, 2015 Report Posted April 24, 2015 (edited) He's not being honest about them doing warranty work either. But I'll give him a chance to be first. Edited April 24, 2015 by Broke_Audio_Addict That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
tbeats Posted April 24, 2015 Author Report Posted April 24, 2015 So when I set my gain with the dd1 on one channel distortion free and move to the other channel and its solid red distortion I shouldn't worry and just blow that speaker to hell?
Broke_Audio_Addict Posted April 24, 2015 Report Posted April 24, 2015 (edited) No you turn it down till its clean grab a dmm and turn the other gain down till the voltage matches the other channel then check for distortion again just to be sure. Edited April 24, 2015 by Broke_Audio_Addict That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
tbeats Posted April 24, 2015 Author Report Posted April 24, 2015 No you turn it down till its clean grab a dmm and turn the other gain down till the voltage matches the other channel then check for distortion again just to be sure. that the problem man its a two channel amp it only has one gain.
n8ball2013 Posted April 24, 2015 Report Posted April 24, 2015 So set your gain with the other channel. Jesus THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
Miguels Posted April 24, 2015 Report Posted April 24, 2015 Would be funny if the head unit is not balanced 1 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Broke_Audio_Addict Posted April 24, 2015 Report Posted April 24, 2015 You could utilize a line driver that can adjust gain for each channel. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
dolarbilz Posted April 24, 2015 Report Posted April 24, 2015 Back gain down tell the distorted channel not distorted.really making a bigger deal out of nothing.
Recommended Posts