mhuffman Posted March 29, 2015 Report Share Posted March 29, 2015 I originally had a 1500.1bd running 1 13w1. it just shut off, made no noise, no smoke, nothing.. that ones gone. I now have a 1000.1bd running 2 jl 13w3v3s at 1ohm and it did the same thing. you put a fuse in and then power the amp and it will power on for about 2 seconds and pop the fuse. its not going into protect mode or anything at all. I've tried powering it without the subs hooked to it and it does the same thing. I currently have another pos amp in there running the subs now so they're not the problem. everything I read said these are stable at 1ohm. and the 1500.1 with the 13w1 was running 1 sub at 4ohm. what could this be??!?!?! all of my wires are installed clean and no chaffing or bare wire anywhere. Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 29, 2015 Report Share Posted March 29, 2015 Where these ones you bought off the shelf ? Or used? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
evermaxx Posted March 29, 2015 Report Share Posted March 29, 2015 Aren't JL w3 a single ohm coil? Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
mhuffman Posted March 29, 2015 Author Report Share Posted March 29, 2015 they were both used and both worked for a few months prior to the issue. the w3s I have are 2ohm. Link to comment Share on other sites More sharing options...
n8ball2013 Posted March 29, 2015 Report Share Posted March 29, 2015 Don't run amps at one ohm that aren't meant to be ran at one ohm THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
reedal Posted March 29, 2015 Report Share Posted March 29, 2015 Sounds to me like a grounding issue. Not enough flow of those electrons required for power. DMM the continuity between the ground and your amps ground input SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
mhuffman Posted March 29, 2015 Author Report Share Posted March 29, 2015 from everything I read they are 1ohm stable.. unless I was reading it wrong and the 1500.1 was not ran at 1ohm. it was a single 4ohm 13w1 ran off one channel Link to comment Share on other sites More sharing options...
mhuffman Posted March 29, 2015 Author Report Share Posted March 29, 2015 what do you guys think the issue with the amp is? everything inside looks fine but I do not know enough about them to go through and check everything on the board or even where to start. Link to comment Share on other sites More sharing options...
Smoove Posted March 29, 2015 Report Share Posted March 29, 2015 Pics of the amps please. I'd like to verify generation before making any guessing about your issue 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 29, 2015 Report Share Posted March 29, 2015 If it blows a fuse, with the speaker wires not hooked up.. its out put side, or power supply. Im not trying to shit on your parade, but, those are OLD boards.... and bought used... well.. shit... what do you want? it is what it is........ SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.