Fi experts, need some info Update 9/18

[ROLEXrifleman]

Can anyone tell from these pics if this sub appears to have the original cone or a recone.

Also, is there anyway to tell if it's "fully loaded" just by looking at it?

and finally, anyone have a spec sheet or box dimensions for an N2 15" dual 2's. rms power handling as well.

TIA

[baron_of_bass]

Are those multiple leads? If so, it looks like the original cone

If imagine that it's fully loaded because those neos get hot. My boy has two of those bastards brand new.

[ROLEXrifleman]

I saw the sub today and yes, each lead is doubled up

should I be concerned with the cosmetics of the motor?

[audiofanaticz]

hard to tell from the pics. if i had a closer look on the surround where its glued to the baskeet, and a better shot of the spiders glued to the basket, i can tell if its a oem glue joint.

cant tell the options unless you tear it apart, and even then it can be hard if you dont know what your looking for.

[OrionStang]

All N2s are 2000w rms (LOL)

Xmax is 28mm, displacement is 0.15.

Thats all I got for the 15. I have full specs for 12 and 18, weird.

[Kyblack76]

hard to tell from the pics. if i had a closer look on the surround where its glued to the baskeet, and a better shot of the spiders glued to the basket, i can tell if its a oem glue joint.

cant tell the options unless you tear it apart, and even then it can be hard if you dont know what your looking for.

wurd...... ^^^^ (you have to see down in the motor for milled cooling channels , and such)

I will say, that when a normal dude, or even the dude that sold the dude the driver, would ALWAYS sell fully loaded when buying such a driver.

No sane person would buy, nor sell say a team sub not loaded. And that driver is just as sex, or was a few years back.

You dont buy or sell a BMW that has window cranks. Makes no sense, not that it hasnt been done.

All 10 FiAA subs ive bought, have all came as loaded as they can. WIth out even asking. I got a quote, and i replied, "the cost is for a fully loaded driver correct?" all ive ever gotten in reply is "the only way i sell them". And this is 2 sperate people

[ROLEXrifleman]

based n these pics what would be a GOOD price to pay for this and would this sub beat hard and take a T2500 all day?

[ROLEXrifleman]

btw, Kyle.. i tried texting you earlier today

[Kyblack76]

btw, Kyle.. i tried texting you earlier today

Got a new number,.... ill text you my new number bruh......

Work is looking at my shit to much for my liking on my work phone. Hard to sell/buy weed, and look for hookers. So i just got my own shit.

[Kyblack76]

based n these pics what would be a GOOD price to pay for this and would this sub beat hard and take a T2500 all day?

I see 5 motors on the Fi face book group for sale right now. JUST the motors. No baskets, or anything. Cheapest is 235.

Would i put a 2500 on one? With out even thinking about it. Hell, you could probably do 2, i would.

And these are around 5 years old mate. Take how it is, but the member that posted them isnt a retard at all.

N212

DUAL 1 | DUAL 2

Fs: 39.6 Hz | 39.2 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 6.40 | 6.47

Qes: .25 | .25

Qts: .24 | .24

Mms: 225g | 231g

Sd: 480cm^2 | 480cm^2

Vas: 23.1 l | 23.1 l

Spl: 89.5dB1W/1m | 89.4dB1W/1m

Bl: 17.8 N/A | 25.1 N/A

Xmax: 28mm * | 28mm *

Rms: 2000W * | 2000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 1.7-2.5cuft | 1.7-2.5cuft

Sub OD: 12.500” | 12.500”

Cut ID: 11.125” | 11.125”

Mounting depth: 0.000” | 0.000”

Displacement: 0.12cuft | 0.12cuft

You wanna buy 2 10" mayhems????? Sell them to you cheap man.... i just dont have the balls to do my car again