I Fixed It But I Have A Different Problem

[99vic]

my amp was cutting out so i decided to go through the wiring i noticed that the remote wire had a cut in it and was touching metal in my car so i replaced. i also added a 12volt fan to it. it and drove around for a while and it docent cut out.

now my next question before i had my subs firing up and port back i got rid of most of the rattle with a cascade kit (dynamat) now with subs and port back it is making my back bumper rattle very bad. someone told me to pour resin in the bumper cover is that a good idea? or can i take it off and put dynamat in the bumper cover and stop it?

here is a video

http://s263.photobucket.com/albums/ii134/9...nt=MOV00397.flv

Edited April 14, 2008 by 99vic

[loganberry]

all that vibrating sounds el-bad-o

i think that the bumper isnt ur biggest problem, fix that one that we heard even before u were by the car

[Shyne151]

I don't know if I read this correctly or not, but do you have the fun running off your remote wire? or a different switched accessory.

[99vic]

all that vibrating sounds el-bad-o

i think that the bumper isnt ur biggest problem, fix that one that we heard even before u were by the car

the only thing rattling is the bumper cover well and the trunk lid but thats imposable to stop. i listened for hours trying to find it and then when i took it off the rattle was almost completely gone. when i put it back on it was back :mad:

[99vic]

I don't know if I read this correctly or not, but do you have the fun running off your remote wire? or a different switched accessory.

i ran the remote wire from the hu to my amp is there a different way of doing it? or is this going over my head?

[Shyne151]

i ran the remote wire from the hu to my amp is there a different way of doing it? or is this going over my head?

i noticed that the remote wire had a cut in it and was touching metal in my car so i replaced. i also added a 12volt fan to

I read it as you were still having problems with it cutting off.. i was going to say the fan should not be hooked to the rmeote wire.

[Torres]

when you get to certain amounts of power...you can cut down on rattle...but not FULLY eliminate it. unless you drive an SPL car...which is another story. i dno about the resin thing...but if you get like...expanding foam or triple expanding foam you can spray it in places to help stop the rattling. like up in the bumper cover, or in the trunk lid itself. but being in a trunk...your lid will probably always rattle against the car itself. but maybe that will help

[99vic]

I read it as you were still having problems with it cutting off.. i was going to say the fan should not be hooked to the rmeote wire.

i was trying to type fast. i replaced it and it works fine now . so i shouldn't put the power from the fan to the remote on the amp?

Edited April 14, 2008 by 99vic

[99vic]

when you get to certain amounts of power...you can cut down on rattle...but not FULLY eliminate it. unless you drive an SPL car...which is another story. i dno about the resin thing...but if you get like...expanding foam or triple expanding foam you can spray it in places to help stop the rattling. like up in the bumper cover, or in the trunk lid itself. but being in a trunk...your lid will probably always rattle against the car itself. but maybe that will help

yea ill try the foam stuff. is tuff stuff good to use ? or what should i use?

[roscoe1129]

you can run the remote to the fan also but use a relay so you dont burn out your remote turn on lead.