meade916 Posted October 7, 2015 Report Posted October 7, 2015 I have been wanting to do this for a while now. I realize i SORTA already tested this amp but since it was way before i had an official "test bench", it never got a fair shake compared to all the other amps i have tested. I had previously used 2 8ga wires on positive and 2 8 ga wires on the negative (all i had close by lol) for power wire. It was also on one single XS Power D1400 Battery. I also don't think i even tested this amp at 1ohm. There also was no "Amp Test Tuesday". So let me officially make this official and put this on the new bench for a REAL "Amp Test Tuesday". Power supply used: 10 XS Power D1400 14v Batteries. XS Power PSC 60a Intellicharger/power Supply (turned OFF during runs, only turned on in between to top batteries off). Tested the amp at 1 ohm to see if it can do rated power. I really didn't need to do .8 and .5 ohms, but since i did that on the last test, i just wanted to show the difference. I really tortured this amp and it took it like a champ!! got nice and warm but that is to be expected! All gains set with the SMD DD-1 Plus to 8db of overlap. That really doesn't matter too much but i think it's a nice little gain setting to start with on woofers. So what type of numbers do you guys think it will do? There is NINE numbers since i tested in all 3 modes at 3 different impedance's. Video will be uploading in about 1 hour. 4 All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
meade916 Posted October 7, 2015 Author Report Posted October 7, 2015 2 All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
Miguels Posted October 7, 2015 Report Posted October 7, 2015 (edited) 4266 1 ohm 4867 .8 ohm 5258 .5 ohm Edited October 7, 2015 by Miguels my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
meade916 Posted October 7, 2015 Author Report Posted October 7, 2015 4266 1 ohm 4867 .8 ohm 5258 .5 ohm dude. It's a SAZ 1500D not 5000 D lol All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
S15_Silvia Posted October 7, 2015 Report Posted October 7, 2015 1738 1Ω 1966 0.8Ω 2304 0.5Ω 2016 Subaru BRZ | Sony XAV-AX100 | Rockford Fosgate DSM 4080 & DSM 40ix | On 6/6/2012 at 6:32 PM, 'LZTYBRN' said: 3. Don't put speakers outside the car unless you are the ice cream man. My feedback thread
Hotdog Posted October 7, 2015 Report Posted October 7, 2015 1700 @ 1 ohm 1850 @ .8 ohm 2000 @ .5 ohm (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
diegoclass2010 Posted October 7, 2015 Report Posted October 7, 2015 Miguel what are you smoking?... must be some good shit I want some too
Miguels Posted October 7, 2015 Report Posted October 7, 2015 its all added up.. that 1500 is a beast its all 3 added.. it should do over rated on all test certified uncerified and dynamic.. dynamic will be close to 2k at .5 ohms my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
Miguels Posted October 7, 2015 Report Posted October 7, 2015 he said he will do 9 test not 1 per load.. if he is doing just one test then it should be lower but it does say 9 test my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
meade916 Posted October 7, 2015 Author Report Posted October 7, 2015 its all added up.. that 1500 is a beast its all 3 added.. it should do over rated on all test certified uncerified and dynamic.. dynamic will be close to 2k at .5 ohms oh shit my bad!!! you are right All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
Recommended Posts