Username Unkown Posted February 25, 2016 Report Posted February 25, 2016 I need to take off the frame from my dc lvl 6 m2 15, i gutted the soft parts, and unbolted the frame, then learned that the frame is heavily glued to a machined spacer, and that spacer is glued to the top plate of the motor.... im taking off the frame to put m4 soft parts/frame on this motor. So what should i do? Use some sort of heat gun? Or a glue activator? I have two of these subs, only gutted one so far, and im stumped, and i dont want to damage the top plates. Quote
OrionStang Posted February 25, 2016 Report Posted February 25, 2016 rag flat-tip screwdriver hammer have fun Quote SMD Super Seller My Feedback Thread
SnowDrifter Posted February 25, 2016 Report Posted February 25, 2016 Any idea what sort of glue is holding it in place? Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Username Unkown Posted February 25, 2016 Author Report Posted February 25, 2016 Lol damn haha, and i dont have any idea,all i know is that this is 2 of the 6 out of jon rabes old set up, was some sort of prototype if i fully understood. So yeah no idea on the glue Quote
_paralyzed_ Posted February 25, 2016 Report Posted February 25, 2016 It's called a basket,not a frame. Quote
Username Unkown Posted February 25, 2016 Author Report Posted February 25, 2016 It's called a basket,not a frame.Damn didnt mean to offend lol just a noob here Quote
Kyblack76 Posted February 25, 2016 Report Posted February 25, 2016 the basket is glued to something? wow.... Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
_paralyzed_ Posted February 25, 2016 Report Posted February 25, 2016 It's called a basket,not a frame.Damn didnt mean to offend lol just a noob here I'm just being informative. It's easier to communicate with the proper terminology. Quote
Username Unkown Posted February 25, 2016 Author Report Posted February 25, 2016 Alright well ok, now i know the correct term thanks, but yeah, loto glue. A couple other woofers i reconed just bolted off and with alot of force with pull off. But they were alot less of a woofer than these, the last thing i reconed was a sundown zv2 lol Quote
Kyblack76 Posted February 25, 2016 Report Posted February 25, 2016 Alright well ok, now i know the correct term thanks, but yeah, loto glue. A couple other woofers i reconed just bolted off and with alot of force with pull off. But they were alot less of a woofer than these, the last thing i reconed was a sundown zv2 lol Still seems off that anyone would glue the basket to the top plate. Or glue the basket to anything. Proto type, foooooo shooooow. Seems like the did that because they couldnt machine, line up, drill, tap, or make work.... one or the other to one or the other. Just seems odd. Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.