mbdblue Posted August 27, 2016 Report Share Posted August 27, 2016 Some of the pics were lost to my old desktop that shit the bed...it wasn't very interesting. The speaker install (Helix Espirit 6.5 components in the front and 5.25 coaxes in the back doors), Dynamatted the doors, hatch, and roof, Installed the Eclipse CD5030, and ran the 0 gauge front to back. I also tinted the car (doors are 35%, quarters and rear are 20%) and removed the roof rails. With this build I'm trying to use some tips and methods I'm not used to...Some I picked up from you guys and some from CAF. I want to finish the box with trim panels vinyl and carpet that match the interior. The amps will be under a false floor so all you'll see is the sub box. As far as glass goes, Ill probably be doing none....although it tends to find it's way in my builds somehow. Set up won't be huge power since my bank account wouldn't like it but I'll try to make it different. box will be 3 SA-8 V2s on my Atomic 1600.1 (still for sale, but won't sell so Ill be using it until it does) my pics are kinda all mixed up so the first few may be random shit I did before the box.... started with some bus bars.... AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
mbdblue Posted August 27, 2016 Author Report Share Posted August 27, 2016 front to back runs under the hood on the other bus bars... and did the recones AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
audiolamb6 Posted August 27, 2016 Report Share Posted August 27, 2016 like the bars continue Link to comment Share on other sites More sharing options...
mbdblue Posted August 27, 2016 Author Report Share Posted August 27, 2016 bought a new portable table but had to make a new plate that fit my router and the chamfer bit... AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
mbdblue Posted August 27, 2016 Author Report Share Posted August 27, 2016 makeshift kreg to send the screws... another crude jig... worked pretty well.... testing the port locations.... that's pretty much were I left off for today. More tomorrow.... AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
Smoove Posted August 28, 2016 Report Share Posted August 28, 2016 those bussbars are sweet 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
_paralyzed_ Posted August 28, 2016 Report Share Posted August 28, 2016 Looking good. It should be a solid system. Link to comment Share on other sites More sharing options...
mbdblue Posted August 28, 2016 Author Report Share Posted August 28, 2016 those bussbars are sweet thanks man! Looking good. It should be a solid system. thanks man I hope so. AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
mbdblue Posted August 28, 2016 Author Report Share Posted August 28, 2016 The only thing I'm worried about is the port size is a little small....I fought with the box specs and port sizes since its only 1.9 cubes net and has 2x 3-1/8" aeros...those SA motors are huge for an 8. Ill take some detailed pics when I get to test fit the subs with the ports installed....It looks like I got extremely lucky that the bottom of the motor doesn't hit the top of the ports (about an 1/8" away)...when planning it out on the MDF, I had to go back and add 1/4" height overall to make sure they wouldn't touch. from top of the port to the top of the mounting surface is 6-3/4"....mounting depth for these subs is 6-5/8" oh and I found pics of this I did a while ago....voltmeters where the dash clock used to be. First is straight from the alternator post, then the other 2 will be amps. (first pic is just a random image I found of what it originally looks like) they look more blue in the pics but the are bright white. AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
mbdblue Posted August 28, 2016 Author Report Share Posted August 28, 2016 sooooo, somewhere along the way I must have fucked up my numbers....Cut and screwed all the panels and went to test fit.... The angle was way off. The box was supposed to be up against the back of the seats. So I had to go back and redo a bunch of shit; but it got done and fits better. new angle vs. old... oh and I fuckin love this UCC bit....more tomorrow AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.