ShadeTreeMechanic Posted December 4, 2016 Report Share Posted December 4, 2016 Does anyone see the clip light when set with the dd1? Quote 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
hdorre Posted December 5, 2016 Report Share Posted December 5, 2016 it set mine with -15... then again i do have 4x the rise... Explain to me What does gain have to do with impedance rise? Hes insinuating that he needs more power. While full tilting while being tuned with a -15dB overlap tone is dirtier than a -5 or -7.5dB overlap, ya get more powa. 1 Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
MrSkippyJ Posted December 5, 2016 Report Share Posted December 5, 2016 But it would still be clipping right? Impedance rise doesn't limit clipping does it? Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Jessica Posted December 5, 2016 Report Share Posted December 5, 2016 But it would still be clipping right? Impedance rise doesn't limit clipping does it? my point Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
hdorre Posted December 5, 2016 Report Share Posted December 5, 2016 But it would still be clipping right? Impedance rise doesn't limit clipping does it? Yes, he would still be clipping. He could have something excessive like 8x rise, and he would still be clipping. Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
tbeats Posted January 16, 2017 Author Report Share Posted January 16, 2017 Been rocking with it set with -5db for a while now does not sound bad but feels like the amp could do a little more. Would going to -7.5 or -10db be safe? With the scv 2000d I feel really probably just a hair more power than the older saz 1500d as they both use a 150 amp fuse. Quote Link to comment Share on other sites More sharing options...
reedal Posted January 17, 2017 Report Share Posted January 17, 2017 5 hours ago, tbeats said: Been rocking with it set with -5db for a while now does not sound bad but feels like the amp could do a little more. Would going to -7.5 or -10db be safe? With the scv 2000d I feel really probably just a hair more power than the older saz 1500d as they both use a 150 amp fuse. I run -10dB on mine. Every song is different though. Just keep your nose on point for the problem signs. Quote SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Karkov Posted January 17, 2017 Report Share Posted January 17, 2017 On 11/2/2016 at 8:44 PM, Karkov said: I start at -15 and work down from there...well now with the DD-1+ I DO WHAT I WANT I actually start with 0 to make sure everything is working on first fire up, then go to -15 and compare. Work my way down from there. if you are already over powering be careful. Do you ever smell your coils?? I tried around -7.5 but seemed like too much, right now I am at -5.5 and it seems about right (thanks DD1+) in spring since I've had this set up for a year at that time I may play with -6 and even -6.5 (and everywhere inbetween to really get it dialed in). Keep in mind that EVERY set up is different, what works for one person won't work for you etc. Watch the temps of your subs, voltage, smell, etc. etc. and if the subs sound like they are too over powered etc. etc. just readjust. Have you figured out what your rise is?? 1 Quote 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
tbeats Posted February 22, 2017 Author Report Share Posted February 22, 2017 On 1/17/2017 at 1:36 AM, Karkov said: I actually start with 0 to make sure everything is working on first fire up, then go to -15 and compare. Work my way down from there. if you are already over powering be careful. Do you ever smell your coils?? I tried around -7.5 but seemed like too much, right now I am at -5.5 and it seems about right (thanks DD1+) in spring since I've had this set up for a year at that time I may play with -6 and even -6.5 (and everywhere inbetween to really get it dialed in). Keep in mind that EVERY set up is different, what works for one person won't work for you etc. Watch the temps of your subs, voltage, smell, etc. etc. and if the subs sound like they are too over powered etc. etc. just readjust. Have you figured out what your rise is?? No still haven't figured out my box rise yet. Iam currently set with the -10db track 40hz and when getting at my max volume I can start to smell the subs so I'm thinking-7.5db might be a better choice. Quote Link to comment Share on other sites More sharing options...
tbeats Posted March 10, 2017 Author Report Share Posted March 10, 2017 My box is 3.12 cubic net tunning from what I get is right at 40hz. So with giving power should I set my subsonic filter higher if I set at -10db track. With tunning at 40hz subsonic should be 30hz according to the manual. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.