BassMunky Posted December 15, 2022 Report Posted December 15, 2022 How I know if it broken or not working anymore???? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
SnowDrifter Posted December 15, 2022 Report Posted December 15, 2022 More information needed ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
BassMunky Posted December 17, 2022 Author Report Posted December 17, 2022 Was working the other day, then all of a sudden it doesn't turn on anymore. All wiring is good. And connections Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
SnowDrifter Posted December 18, 2022 Report Posted December 18, 2022 You've validated it has ground, +12v, and turn on? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
BassMunky Posted January 19, 2023 Author Report Posted January 19, 2023 On 12/17/2022 at 2:26 PM, SnowDrifter said: You've validated it has ground, +12v, and turn on? How? Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
audiofanaticz Posted January 19, 2023 Report Posted January 19, 2023 11 hours ago, BassMunky said: How? With a multimeter, or even a test light for that matter. Seems like that cheap accurate stinger volt meter like you said in the other post is working pretty well!
BassMunky Posted January 20, 2023 Author Report Posted January 20, 2023 12 hours ago, audiofanaticz said: With a multimeter, or even a test light for that matter. Seems like that cheap accurate stinger volt meter like you said in the other post is working pretty well! I'm getting power but it not light in g up Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
audiofanaticz Posted January 24, 2023 Report Posted January 24, 2023 make sure there is power on the remote too?? if there is then one would think the meter went bad.
Never Enough Bass Posted January 26, 2023 Report Posted January 26, 2023 It's cheap just buy a new 1 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt
sICSoundz Posted January 26, 2023 Report Posted January 26, 2023 Or make sure something didn't get disconnected or fix it and save the few bucks. Such a throw away society
Recommended Posts
Archived
This topic is now archived and is closed to further replies.