Starting My A-pillars

[IH8PunkRok]

try and take alotta pics bro. im still tryin to figure this whole glassing thing out and ur pics will inevitably help me and other noobs tryin this shit.

[dwright27]

try and take alotta pics bro. im still tryin to figure this whole glassing thing out and ur pics will inevitably help me and other noobs tryin this shit.

yea, the first time i did it at work on some of the panels we do with kerf cuts and shit it was actually pretty easy BECAUSE of all the help i had recieved here and all the reading i had done here.

[n8ball2013]

stay away from the t shirt for cloth. Use a good cloth. the shirt will sag under the weight of the resin and you will have lots of filling sanding and repeating. good luck.

[98HOEONSIXEZ]

stay away from the t shirt for cloth. Use a good cloth. the shirt will sag under the weight of the resin and you will have lots of filling sanding and repeating. good luck.

Even if you stretch it really tight?and hes just doing pillars so it wont be stretched to far to leave room for sagging right?not arguing just saying.

[USLESS]

Well maybe you should have read what james said before you posted, hope you enjoy your vacation. . "next persona who post talking shit to dwight for no reason gets a vacation. either help him or shut up "

ho did you know i was on vacation thanks ill try

[n8ball2013]

whenever Ive used t shirt or seen it used it sags a little. now it could be because It wasnt stretched super tight but I know when i did it it was stretched hella tight.

[USLESS]

so today i started on my a pillars. putting a 6.5 in each one or maybe 2 in each one.

should i glass the entire pillar or just the area right around where im putting my rings and speakers?? also when i lay my "stretchy" material can i just resin it or is there something else i need to do??

im using a polyester fleece blanket and am ordering my Duraglass and evercoat at the end of the week to avoid the holiday delay. is a co ax acceptable or should i use components?

thanks guys, ill post some pictures if i can get my damn POS digi cam to work.

if you are going to do this then there are plunty of refernces on the web us um. then practis with the glass so you get a feel of what is in volved and how it works. o and go to wal-mart a get some flec

http://www.explorerforum.com/fiberglass/fiberglassing.htm

http://volvospeed.com/Mods/fiberglass_speakerbox.htmlhttp://www.ihowd.com/how-to-build-a-fiberglass-boxhttp://www.thirtythree.org/FiberglassEnclosureProject/http://www.caraudiomag.com/technical/caep_...aciousness.html

[knowledge]

nice refernces bro

[AI James]

ho did you know i was on vacation thanks ill try

sorry i just caught this today...have fun

[dwright27]

if you are going to do this then there are plunty of refernces on the web us um. then practis with the glass so you get a feel of what is in volved and how it works. o and go to wal-mart a get some flec

http://www.explorerforum.com/fiberglass/fiberglassing.htm

http://volvospeed.com/Mods/fiberglass_speakerbox.htmlhttp://www.ihowd.com/how-to-build-a-fiberglass-boxhttp://www.thirtythree.org/FiberglassEnclosureProject/http://www.caraudiomag.com/technical/caep_...aciousness.html

i already have my fleece. bought 4 linear yards of it from walmart some time ago.

thanks for the links even though James gave you a vacation ....