Team-Atomic-Andrew Posted May 30, 2010 Report Share Posted May 30, 2010 this is a video of a production car in china crashed at 64km/h or 40mph it is a real car that is sold in china, it has NO frame rails underneath just the driveshaft and a thin support rail holding the car together Quote Link to comment Share on other sites More sharing options...
JCiarlino Posted May 30, 2010 Report Share Posted May 30, 2010 5 Star crash rating right there. Quote Link to comment Share on other sites More sharing options...
Freshman6969 Posted May 30, 2010 Report Share Posted May 30, 2010 what a POS, lmaoo wow that shit got wreaked Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
steven Posted May 30, 2010 Report Share Posted May 30, 2010 Anything from china is shit. I had to buy some new steak knives today and the handles just snapped off in 2 of them cutting into the first steak. China FTL.... Quote Link to comment Share on other sites More sharing options...
Autruche Posted May 30, 2010 Report Share Posted May 30, 2010 My friend had gotten 2 Chinese LEDs and they broke right after he got them, apparently they make their cars with the same quality. Must be light as hell though... Horsepower to weight ratio is very important, but so is impact resistance... Quote Need Test Tones/Sine Waves? Click Here!My Saab 9000 build1993 Saab 9000 Aero 5spdPioneer - Zapco - Hifonics - Sundown Audio - O2 Audio - RE AudioJust Say No To Rear SpeakersJust Say No To CCA WireReal Men Drive StickHit me up on Facebook, if you want Link to comment Share on other sites More sharing options...
Stephen Posted May 30, 2010 Report Share Posted May 30, 2010 my car does not have a frame. unibody?? Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER Link to comment Share on other sites More sharing options...
AUDIOADDICT02 Posted May 30, 2010 Report Share Posted May 30, 2010 That's only @ 40mph?!?! I could only imagine what would happen to that POS if it's crashed on the freeway! Quote CHECK OUT MY MYSPACE; SOME PAINT WORK I'VE DONE: http://www.myspace.c...customcreationz DODGE RAM 1500 QUAD CAB BOX BUILD: http://www.stevemead...showtopic=48978 DODGE RAM 1500 RUMBLEBEE EDITION CUSTOM ENCLOSURE: http://www.stevemead...showtopic=48983 PREFAB REMODELING: http://www.stevemead...box-remodeling/ G35 CUSTOM PAINTED L7 BOX: http://www.stevemead...om-painted-box/ CHEVY SINGLE CAB PAINTED SUB BOX/AMP RACK: http://www.stevemead...vy-boxamp-rack/ KICKER L512 BOX BUILT TO SPECS: http://www.stevemead...-kicker-l5-box/ RF HE2 10'S KERF PORTED BOX: http://www.stevemead...erf-ported-box/ 2 DC LEVEL 3 15'S KERF ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/115502-kerf-ported-enclosure/ 2 HCCA 15'S PORTED ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/129468-2-hcca-15s-enclosure/ Link to comment Share on other sites More sharing options...
BeatBox Posted May 30, 2010 Report Share Posted May 30, 2010 id rather wreck in a smart car than in this FPOS Quote Link to comment Share on other sites More sharing options...
Team-Atomic-Andrew Posted May 30, 2010 Author Report Share Posted May 30, 2010 my car does not have a frame. unibody?? it may not have a chassis but it has at least 2 frame rails usually the run front to back really thick beams Quote Link to comment Share on other sites More sharing options...
BanginOnABudget Posted May 31, 2010 Report Share Posted May 31, 2010 (edited) you cant even buy chinese cars in the states, whats the point of this thread. Edited May 31, 2010 by BanginOnABudget Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.