Chickens 2002 Caddy, The Hoopty 8 18" Fi Btl + Rockford Fosgate (2) T15k Amps! UPDATES! IPAD AIR 2 In Dash page 335

[DamienfromFrance]

I can't find what Xmax would be on a fully Loaded BTL18 w/ Hixmax option but STOCK IS 16mm so I'mma guess 20mm one way?

nope!! no 20 mm one way but 27mm

what a huge and awesome work Steve!! :blink:

Edited September 2, 2007 by DamienfromFrance

[LSN2meBoom916]

Pi x R^2 .....(3.14X81)=254.57in^2

(254.57in^2)x8=20,620.2857in^2

***EDIT***

Xmax on a fully Loaded BTL18 w/ Hixmax option would be 27mm I'm told.

27mm=1.10"

so...If SD=20,620.2857in^2

and xmax is 1.10"...

20,620.2857in^2 X 1.10"=22,724.396in^3

22,724.396/1728=13.15069 CUBIC FEET......OVER 13cubic feet ONE WAY!

SO....

On each ocillation/cycle (full stroke forward and back)....

These 8-18's will move OVER 26cubic feet worth of air to the tune of what ever frequency you like BEST!

Or roughly Twice what Steves Tahoe will do

OUCH!

nope!! no 20 mm one way but 27mm

what a huge and awesome work Steve!! :blink:

THANK YOU for the correction.

Even more impressive that way.

[IH8PunkRok]

that loox so awesome with the amps in like that

i was wonderin how u were gonna do that steve

[jasonw30]

not too many words left to say about this project.....mind blowing!!!!!WOW!!!

[meade916]

thanks guys, THANKS BIBBSTER!!! That is a SWEET PHOTOSHOP!! Ima post it on the threads in the other 3 boards i have this build on.....that is EXACTLY how i think they will look back thuurrrrr!

LOL, now I AM i excited!

oh ya reality is setting in, i have old work boots on, old raggedy dickies, new white shirt and my destination is the bucket of resin i see thru the window.........starbucks FTW then i start...

thanks again guys!

[Chode69]

lookin fuckin saweet!!!!!!

[BlockShaker]

Steve, Are you good with actuators? I was just thinking about how an actuator on the bottom amp would look when you open up the trunk lid. It can motorize back and tilt back on a 45 degree angle so both amps can be more viewable for show purposes only.

Edited September 2, 2007 by BlockShaker

[NickIsCool]

THANK YOU for the correction.

Even more impressive that way.

god damn that is alot of air!!!!!

insane hair tricks!!!!

[95pimpalass]

Steve, Are you good with actuators? I was just thinking about how an actuator on the bottom amp would look when you open up the trunk lid. It can motorize back and tilt back on a 45 degree angle so both amps can be more viewable for show purposes only.

something of this nature would be bad ass

[meade916]

ya i thought about it but ill be happy if i can get them mounted......actuaters would be fun if the amps were smaller. Ill probably just do something to make them look good when you open the back and call it done.