skittlesRgood

when you did the math did you assume 100% efficiency?

that curb must work out.

damn... that must have taken a long time to make.

he doesnt mean the heat from the engine, at least i hope. i think he means that it could have shorted out against the engine. that could cause something like this to happen.

literally my reaction. if that is 4awg wire that fuse could be too big. but because of where it melted i would say it was a bad connection. there was a lot of resistance at that spot for whatever reason.

so she didnt like you?

did she know you liked her? did she like you? did your friend know? dont be a child and give her number out, trying to get payback because someone didnt like you. be a man and move on. its not a big deal. if your friend knew you liked her then he is an asshole. be glad you found out he is a shitty friend now instead of later.

sheets wont stretch for shit.

passenger looked bored lol.

anything that will soak up resin will work but you want something that stretches a lot. thats why people usually use fleece. ive used grill cloth before.

we dont need to hear about what you and your GF do in the privacy of your own bedroom.

these never turn out well for the OP... but they never learn

and if a solder joint on a pin inside the HU is broken/cracked you would be able to tell that by wiggling the wires? the simplest trouble shoot is to swap out the HU with another one. if the problem goes away, you know its your HU. what do you think could be causing interference? explain your logic. the HU it not connected to the computer or anything. its just getting 12v from your battery like everything else in your car.

hey what was that mr Opelousas, Louisiana. lol fail. no way in hell im watching that whole video. it got turned off pretty quick.

starting a fight for no reason. whats funny about someone putting all their time and money into their dream of owning a business only to have it fail? if they do go under it'll be nothing but sad. you want to start a business yourself. i would have imagined you to be sympathetic.

that bullz will have as much copper as your 4awg. you are not buying a performance product here where someone can make something good at a cheap price. you are just buying copper. and copper isnt cheap. so if you see a cheap ass price it means nothing more than less copper. do it right and get the good stuff. and remember your 80 amp alt isnt going to supply the power that amp needs. you need a lot more than just wire. pretty sure i told you that already. just want to make sure you understand that. you dont want to spend $50 when you need over $400 in electrical upgrades.

This is what makes sense to me. just dont expect a big jump in output when you do this. the only other downside is that in a year or two you have more of a change of damaging a sub and having to pay more in the long run. but at 1.5ohm there is less power to each woofer so maybe there is a smaller chance of damaging something. i dunno, its all up to you boss.

if you have room for one more 10" you have enough room for the two ported. after the loss in power to each sub, i dont think you will notice much difference adding the 3rd sub unless you go with .67ohm. go ported and you will get a very noticeable increase.

lmao, i JUST bought the same laptop with the i5 processor. just waiting for it to get here. a lot of people told me this is a great laptop. shouldn't have a problem selling it. there was a guy just the other day asking about a laptop in the computer section. this one might be just what he was looking for. see if you can find his thread.

why did you make two logs??????? just make a second post in ONE thread.

i would be offended twisted. apparently no one wants a reach around from you, because they are not really trying.

the why the hell is everything automobile related advertised as 12v? lol this is all so confuzzling! yet intriguing at the same time cause they use a 12v DC battery.

that sounds like what a cap is supposed to fix. what that quick dim is all about is your alt takes a second to sense there is a load and kick itself on. so you are probably just seeing that delay. HOWEVER, 12.8 at idle and 13.2 at 2000rpm is not a good thing. you should be charging at 13.8-15v.

when people say the same, they are talking like, the lead acid, needs to be with another lead acid one, or AGM needs to be with AGM... because they charge differently, and will draw off each other untill they die.. *if i remember right just when you think you know everything, some genius comes along tryin to tell you otherwise! lol so i'm assuming the stock car battery is AGM? so that would mean if i wanted to run a 2 batt setup with an xs power in the rear i would need to replace the front battery with an xs power too? if so... Damn! imma be one broke ass college student. curse you 12 volt bug! curse you! no, your stock battery is lead acid. it should be replaced though, like you said. even among batteries of the same type, different brands have different rates of discharge. the one that discharges faster will be stressed more than the other battery. so in theory the better battery can fail before the lesser one. that being said, i have mixed brands and battery types and not had any problems. i spent a good deal of money to make all my batteries the same brand and had no improvement.

sorry... this is a joke right? the baskets are aluminum right? so thats pretty hard to weld. plus wouldnt it fuck up the glue, surround, or even light the paper cone on fire if you got a good spark? i dont weld so i could be wrong but thats my take on it. get some pics. it might be just fine. but a new basket and recone wont come cheap.